User manual SANGEAN RCR-3

[. . . ] The radio may fall, causing serious personal injury and damage to the radio. Ventilation: This radio should be situated so that its location or position does not interfere with its proper ventilation. For example, the radio should not be used on a bed, sofa, rug or other soft surfaces that may block the ventilation openings. It should not be placed in a built-in situation like a cabinet that may reduce air flow through the ventilation openings. [. . . ] * You can also stop the process and save the setting anytime by pressing TIME button. Press the DATE button then press SET button, the year digits will flash. * You can also stop the process and save the setting anytime by pressing DATE button. To set 12 hour clock format, press Station preset 1, or, to set 24 hours clock format, press Station preset 2. When the display shows the time, press the SET button for more than 4 seconds to set the clock 1 hour faster, and the display will show . , press the SET button for more than 4 seconds, the symbol will disappear. 5 second and release, it will tune into the next frequency with reception. Press 1 of them and hold for more than 2 seconds until the radio beeps, and the GB station frequency will be saved into the chosen preset. Simply press 1 of the PRESET buttons (from 1 to 7) you would like to tune into. Alarm 1 and Alarm 2 can be set to wake you by buzzer, and Alarm 3 and Alarm 4 can be set with radio alarm. When the alarm light is on, it means the indicated alarm will active in 24 hours. How to set Buzzer Alarm (Alarm 1 and Alarm 2) The buzzer beep increases in volume every 15 seconds. the buzzer will beep for 1 hour , or stop by pressing the Power button. The buzzer alarm volume may be adjusted through the Alarm sound level control button on the bottom of the radio. Press the SET button again and adjust the minute by pressing TUNING up or down button. Select required days of week on which the alarm will beep by pressing day of week buttons. * You can press the Alarm 1(or Alarm 2) button anytime to complete the setting. How to set Radio Alarm (Alarm 3 and Alarm 4) The Radio Alarm will sound for 1 hour, or stop by pressing the Power button. The Radio Alarm volume may be adjusted through the Alarm sound level control button on the bottom of the radio. Press the SET button again and adjust the minute by pressing TUNING up or down button. [. . . ] For some countries where don't provide radio controlled time facility but able to receive radio controlled time signal from nearby countries and the time zone is different, you may use the TIME ZONE switch to correct the time. For example, in Turkey which is one hour ahead of Central European time but still can receive radio controlled time signal from Germany (Central European time), you may use this TIME ZONE GB switch to correct the local time. When it is switched to darker, you can turn the LIGHT LEVEL CONTROL button to adjust the display light to be the most dark. Plug in external audio devices such as CD player to the AUX IN socket (on the side of the radio), then play your device and press the Band button repeatedly until you see "AU" on the display. [. . . ]