User manual SEVERIN AS 3947

[. . . ] Caution: do not touch the blade while operating the appliance, and do not attempt to stop it while it is still turning. Always remove the plug from the wall socket - after use, - in case of any malfunction, and also - before cleaning the appliance. When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself. [. . . ] to change the blade , proceed as described in section `Detaching and cleaning the blade'. Release button To start operating the appliance, first press the release button, then press and hold the operating push-button. - Fit the collection tray underneath the appliance in such a way that the tray sits safely in both tracks. - Use your right hand to place the food to be sliced onto the sliding tray and press it against the stop plate. - Fit the safety holder, with the studded side facing the blade, onto the sliding tray. - Use your left hand to hold down the release button while simultaneously pressing the operating push-button, and move the sliding tray towards the rotating blade. At the same time, lightly press the end-piece holder with the food towards the blade. - The end-piece holder ensures safe handling of the food while slicing. - Once slicing is finished, release the operating push-button in order to switch the appliance off. For safety reasons, always bring the stop plate back to its rest position after use so that it is flush with the blade. Practical hints - When cutting a loaf of bread where the crust is thicker or harder on one side, it should be placed against the blade in such a way that the firm side is facing the blade. - When cutting cheese or very thin slices of other foods, use a slightly damp cloth to moisten the blade before cutting. Cleaning and care Clean the slicer before using it for the first time, or after a long period of non-use. General To prevent perishable food particles from collecting in the slicer, clean it thoroughly after use. Always remove the plug from the wall socket before cleaning the slicer or detaching any accessories. Bring the stop plate to its rest position so that the blade does not protrude. To avoid the risk of electric shock, do not clean the appliance with water and do not immerse it in liquid of any kind. If necessary, the housing may be wiped with a slightly damp, lint-free cloth. [. . . ] This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. This guarantee does not affect your statutory rights, nor any legal rights you may have as a consumer under applicable national legislation governing the purchase of goods. The stainless-steel blade can be cleaned with a slightly damp, lint-free cloth. [. . . ]