User manual SEVERIN BA 3233

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SEVERIN BA 3233. We hope that this SEVERIN BA 3233 user guide will be useful to you.


SEVERIN BA 3233 : Download the complete user guide (559 Ko)

You may also download the following manuals related to this product:

   SEVERIN BA 3233 FICHE PRODUIT (163 ko)
   SEVERIN BA 3233 DATASHEET (677 ko)

Manual abstract: user guide SEVERIN BA 3233

Detailed instructions for use are in the User's Guide.

[. . . ] With the iron placed on its base stand, ensure that this too is on a stable and durable surface. Always switch off and remove the plug from the wall socket after use, and also - in case of any malfunction, - during cleaning. Before the appliance is used, the main body including the power cord as well as any attachment fitted should be checked thoroughly for any defects. [. . . ] Should you be unsure about the hardness of the water in your area, please enquire at the relevant local authority department. Fill the reservoir to the indicated “Max” level only. General information about ironing Always check first whether a label with ironing instructions is attached to the article to be ironed. - The meaning of the ironing symbols is as follows: • synthetics (low temperature) •• silk and wool (medium temperature) ••• cotton and linen (high temperature) - These markings can also be found on the temperature control in the form of dot symbols. — Laundry to be ironed should be sorted according to the fabric ironing temperature. — When ironing highly sensitive fabrics, or if you are not sure about the fabrics, you may carefully test-iron at a non-visible point, e. — If the laundry is being dried in a dryer before ironing, the temperature should be adjusted to “iron dry”. Very dry 6 Foldable handle Before the iron is used, fold the handle upwards until it locks securely into the operating position. After use, the handle can be folded down for space-saving storage by pressing the release button. Steam switch With the steam function activated, an additional hot steam jet is emitted from the soleplate. This function is very useful for removing stubborn creases or when ironing difficult or thick fabrics. — In order to use the steam function, the temperature control must be set to the steam-section marked on the control knob. This will result in the removal of possible dust particles from the soleplate and subsequently lessen the smell typically encountered when first switching on. The temperature level for steam ironing is indicated on the temperature control knob. - After filling the reservoir with water, place the steam iron upright on its base stand and insert the plug into the wall socket. - Set the temperature control knob to the required ironing temperature as indicated by the ironing symbols. The light will go out once the required ironing temperature is reached. — Before ironing any fabrics, the soleplate should be cleaned by passing it over an old, clean cotton cloth, while using the steam jet function; this helps to flush out any dirt residues or lint particles trapped inside the openings in the soleplate. [. . . ] - Pour out any remaining water, let the iron heat up again and pass the soleplate over an old, clean cotton cloth. The remaining water trapped in the soleplate will evaporate, helping the cleaning process. Disposal Do not dispose of old or defective appliances in domestic garbage; this should only be done through public collection points. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SEVERIN BA 3233




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SEVERIN BA 3233 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.