User manual SEVERIN BK 3177

[. . . ] Make sure that the supply voltage corresponds with the voltage marked on the rating label of the appliance. ρ Children should be supervised to ensure that they do not play with the appliance. ρ Caution: Keep any packaging materials well away from children: there is a risk of suffocation. [. . . ] This appliance is intended for domestic or similar applications, such as in - shops, offices and other similar working environments, - agricultural areas, - hotels, motels etc. Operation When warming baby food, strict attention should be paid to the manufacturer’s information on the packaging. The heating time largely depends on the quantity of the food, as well as its initial temperature. the following table provides a general guide to heating times: Initial temperature 7 °C Quantity 100 ml 200 ml 300 ml 20 °C 300 ml. Baby bottle – Pull up the lift-out holder and put the filled bottle into the holder, before lowering it carefully back into the container. Baby-food glass jar – Remove the lid from the glass jar containing the food. € Pull up the lift-out holder and put the glass jar into the holder; then lower it carefully back into the container. Fill the warming container with sufficient water to reach a level of about 1. € Insert the plug into a wall socket; the heating process begins and the indicator light will come on during the warm-up and keep-warm stages. € To ensure an even temperature distribution throughout the baby food during the warming process, the bottle or jar should be shaken or stirred at regular intervals. Before it is fed to the child, the temperature of the food must be carefully checked, e. € Once the pre-set temperature level is reached, use the lift-out holder to remove the bottle or glass jar from the container. € To keep the baby food warm, set the temperature control to position 1 or 2. To prevent any build-up of bacteria or loss of vitamins, baby food should not be kept warm for too long. € Set the temperature control to its  9 Temperature Minutes Minutes control 3 3 3 9 13 15 7 9 11 125 g 200 g 250 g 3 3 3 10 12 15 9 10 11 7 °C = temperature from the fridge 20 °C = room temperature For 200 ml and 300 ml, the specified values refer to glass bottles only. Water temperature inside the warming container The following table contains information on water temperatures inside the warming container. Note that these temperatures refer to the water only, not to the food itself. 75-85 °C clean the bottle warmer with water and do not immerse it in water. [. . . ] Remove the plug from the wall outlet and leave the solution standing for another 20 minutes to take effect. € Pour the descaling solution away, fill the warming container with clean water to a point just below the max level mark, and then pour the water out again. General care and cleaning  Always remove the plug from the socket and allow the bottle warmer to cool down sufficiently before cleaning. [. . . ]