User manual SEVERIN KV 8011

[. . . ] 1 Greeting Dear Customers, we are pleased that you have selected a SEVERIN fully automatic coffee maker. Before you start, please take some time to get to know your machine with the help of the operating instructions. For your safety Important notes for your safety are marked in a special fashion. Be sure to follow these instructions to avoid accidents and damage to the device: Indicates notes that must be heeded to prevent a danger or injury or a danger to life. [. . . ] Press the menu button for at least 3 seconds and use the e-Select to select the DEVICE MENU. Turn the e-Select to change the setting and • confirm your entry by pressing the e-Select or • cancel the change with the button under the display field . 3 Water filter If you want to use a water filter, you must set the device accordingly. The water filter improves the water quality and the device requires less descaling if properly operated. SEVERIN recommends the use of a SEVERIN-BWT water filter for high water quality. Press the menu button for at least 3 seconds and use the e-Select to select the DEVICE MENU. Turn the e-Select to change the setting and • confirm your entry by pressing the e-Select or • cancel the change with the button under the display field NOTE!If you have accidentally selected the incorrect language, you can reset the device to the factory setting (►„Resetting the device in case of incorrect language setting“). 2 Water hardness Select the water hardness according to the water hardness in your household. Depending on the setting, your device will inform you when it is time to perform a descaling. In order to operate your device optimally, set the water hardness according to the specifications of your water utility and the water test strip. Press the menu button for at least 3 seconds and use the e-Select to select the DEVICE MENU. Select with the e-Select • YES, if you want to insert a water filter in the water tank or • NO, if you do not want to use a water filter. 4 Energy savings options The device can switch itself off if it is not used for a longer period of time. Press the menu button for at least 3 seconds and use the e-Select to select the DEVICE MENU. Then select the AUTO POWER-OFF • the button under the display field settings. ÂÂ if you want to keep your personal For a short while, the display shows the note: DEVICE SET TO FACTORY DEFAULTS. ÂÂ The display shows the currently-set time for the automatic switch-off. Turn the e-Select to change the setting and • confirm your entry by pressing the e-Select or • cancel the change with the button under the display field . Resetting the device in case of incorrect language setting If you have accidentally set an incorrect language and a resetting via the menu is not possible, you can also reset the device to the delivery state as follows: 1. Switch the device on and continue to hold the buttons down until the message DEVICE SET TO FACTORY DEFAULTS. 5 Resetting the device You can reset the device to the factory settings. [. . . ] 4 Cleaning the bean container There is a danger of injuries and damage to the device if you put your fingers into the been feed or object fall into the bean feed. To avoid contaminations, wipe the bean container regularly with a dry, lint-free cloth. Ideally this is done when the supply of beans is used up and before new beans are added. In addition to the cleaning messages, the display also shows an appropriate message in case of a technical fault. [. . . ]