User manual SEVERIN PG 8525

[. . . ] When grilling food with a high fat 9 or moisture content, splashes are not always avoidable. — Do not position the grill next to a wall or corner, and ensure that no inflammable materials are stored near it. — Remember that food with a high fat or moisture content may tend to ignite. The water helps to cool down the grill pan, reduces the build-up of smoke, and also facilitates cleaning. [. . . ] Before carrying, transporting or storing the grill, ensure that is has sufficiently cooled down. Ensure that the grill is not stored outdoors, or in any other location where it might be subjected to extremes of temperature or high humidity. No responsibility is accepted if damage results from improper use, or if these instructions are not complied with. This barbecue grill is intended for domestic use only and not for commercial applications. 10 ● In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. Grill with additional base stand: Assemble the base stand according to the schematic diagram supplied, and then place the grill onto the stand. The small feet under the grill connect with the tops of the vertical legs of the base stand. Ensure that the grill and base stand are placed in a safe and stable position. The power cord should be routed in such a way that no one is likely to trip over it. The safety switch is activated automatically when the heating element has been properly fitted. Before using for the first time - Remove any packaging materials from the appliance. If required, additional accessories may be fitted according to the diagram shown in the instructions. - Let the grill heat up for approximately 10 minutes without any food on the rack. This will lessen the smell typically encountered when first switching on a new grill (a slight smell and a little smoke may be emitted - ensure sufficient ventilation). Grilling - The grill pan must be filled with water up to the ‘Max’ marking. - Fit the heating element; then ensure that the grill plate is placed correctly onto the element. The indicator light comes on, and the heating element is permanently switched on. - After approximately 5-10 minutes, the heating element reaches the right temperature for grilling. - The grill can also be used to keep the food warm: by turning the thermostat control back, the intervals between the heating element switching on and off can be reduced to a minimum. Caution: to prevent a possible build-up of heat and subsequent damage to the appliance, the food to be cooked must be placed directly onto the grill plate. Aluminium foil, barbecue plates or other items) between the food and the heating element. [. . . ] If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. If within the guarantee period, please also provide the guarantee card and proof of purchase. Hvis apparatet for eksempel har været tabt på en hård overflade må det ikke længere anvendes: Selv skader der ikke er synlige kan have ugunstig indvirkning på sikkerheden ved brug af apparatet. For at undgå risikoen for elektrisk stød må varmeelementet og ledningen aldrig nedsænkes i nogen form for væske og heller komme i kontakt med den. [. . . ]