User manual SEVERIN TO 2035

[. . . ] Children should be supervised to ensure that they do not play with the appliance. Caution: keep any packaging materials well away from children, as they are a potential source of danger e. During operation, the appliance must be placed on a heat-resistant surface, impervious to splashes and stains. Do not position the appliance on or near hot ● ● ● ● ● ● ● ● surfaces, open flames or inflammable vapours. [. . . ] This is to ensure that the food is at a sufficient distance from the baking tray, the oven interior and the heating elements. Wings of a chicken) should be held in with a toothpick, a piece of string or other suitable means. This ensures that no part of the food can protrude or come off during the cooking process. - Inserting and removing the rotating spit: - Once the food has been securely attached, place the spit onto the handle assembly. Ensure that the indentations in the handle assembly fit into the corresponding recesses in the spit. - Slide the spit end-piece with the drive 9 Temperature control With the temperature control knob, the temperature can be set to the desired level. Once the pre-set temperature has been reached, the indicator lamp switches off. 5-position switch settings ● Both heating elements and rotating spit switched off. Upper heat Upper heat with rotating spit Upper heat and lower heat Lower heat The heating elements will only be switched unit connection into the drive unit (see picture II). - Place the idle end of the spit into its holding bracket on the other side (see picture I). Start up - Clean the appliance (see General care and cleaning) and remove any packing materials completely. - Pre-heat the oven compartment for several minutes with the door closed, using both heating elements. Set the temperature control knob to the required level and use the timer control knob to select the desired pre-heating time. The indicator lamp switches off once the preset temperature has been reached. When cooking food containing fat or moisture, use the baking tray to stop any dripping into the interior of the appliance. When using the rotating spit, always ensure that the baking rack and baking tray are properly inserted into one of the lower guide rails. - The baking tray must always be placed on the baking rack and inserted into one of the guide rails. - Close the door, set the temperature control knob to the required level and 10 - - - use the timer knob to select the desired cooking time. For overhead baking or grilling, either the upper or the upper and lower elements may be selected. The switch settings (upper heat/lower heat) may be changed during the cooking process. [. . . ] Make sure that the reflector sheet is fitted in its proper position underneath the heating elements after cleaning. Disposal Do not dispose of old or defective appliances in domestic garbage; this should only be done through public collection points. ● Do not use abrasives , harsh cleaning solutions or spray-type oven cleaners. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. [. . . ]