User manual SHARP AL-2061

[. . . ] This guide explains how to install the machine, and indicates important points to note for installation and usage. Read and understand this guide to ensure that you install the machine correctly. After installation, read the Operation Guide to make full use of all the machine has to offer. Open the carton and check if the following components and accessories are included. [. . . ] Be sure not to plug this telephone line cord into the "TEL" jack. The "TEL" jack is used to attach an extension telephone or answering machine to the machine. How to use the operation guide Detailed explanations of the functions that can be used on the machine are provided in the Operation Guide in PDF format. If your area experiences a high incidence of lightning or power surges, we recommend that you install surge protectors for the power and telephone lines. Surge protectors can be purchased from your retailer or at most telephone specialty stores. If desired, an answering machine or external telephone can be connected to the machine through the telephone jack, labeled "TEL, " on the rear of the machine. Connecting an answering machine to the machine allows you to receive both voice and fax messages when you are out. To use this feature, first change the outgoing message of your answering machine, and then set the reception mode of the machine to "A. Adobe® Reader® can be downloaded from the following URL: http://www. If you are using distinctive ringing with an answering machine, you do not need to follow the procedure described below. (Please note that when distinctive ringing is used, the answering machine must be distinctive ring compatible. A paper form operation manul can be obtained from your authorized SHARP dealder or upon request by contacting SHARP. 78 Please inform the model name, the serial number of the machine and the language needed. Model Type Photoconductive type Document glass type Copy/printing system Originals Originals size Copy size Copying speed*1 Continuous copy First-copy time*2 Warm-up time*3 Copy ratio AL-2061 Digital Multifunctional System, Desktop OPC drum Fixed Dry, electrostatic transfer Sheets, bound documents Max. 7 seconds (When user program 24 is set to ON) (paper: A4, exposure mode: AUTO, copy ratio: 100%) Approx. Document glass: Variable: 25% to 400% in 1% increments (total 376 steps) Fixed preset: 25 %, 50 %, 70 %, 86 %, 100 %, 141 %, 200 %, 400% RSPF: Variable: 50% to 200% in 1% increments (total 151 steps) Fixed preset: 50 %, 70 %, 86 %, 100 %, 141 %, 200 % Document glass: Moving optical source, slit exposure (stationary platen) with automatic exposure function RSPF: Moving original One automatic feeding paper tray and one optional paper tray (250 sheets each) + bypass tray (50 sheets) Heat rollers Magnetic brush development Tri-color CCD light source (CCD: 3 components; R, G, and B) Scan: 600 x 300 dpi Output: 600 x 600 dpi (AUTO/TEXT mode) Scan: 600 x 600 dpi Output: 600 x 600 dpi (PHOTO mode) 256 tones (8 bits) Local voltage ±10% (For this copier's power supply requirement, see the name plate located on the back of the unit. 7 B Standby mode: - (*) Sound pressure level LpAm (reference) (Bystander positions) Copying mode: 51 dB Standby mode: - (*) (*) = Less than background noise Noise emission measurement in accordance with ISO7779. Type Scanning method Light source Resolution Original types Effective scanning area Scanning speed Input Data Output Data Scanning colors Protocol Interface Drop out color Supported operating systems Void area Interface cables Scanner utilities Flatbed scanner Document glass/RSPF Tri-color CCD light source (CCD: 3 components; R, G, and B) Basic: 600 dpi x 600 dpi Setting range: 50 dpi - 9600 dpi Sheet media, books 216 mm (Lengthwise) x 356 mm (Width) 2. Applicable telephone line Compression method Transmission modes Scanning method Scanning resolution (supports ITU-T standards) Recording method Transmission speed Transmission time Paper size Effective recording width Public switched telephone network MH, MR, MMR, JBIG Super G3, G3 (the machine can only send faxes to and receive faxes from machines that support G3 or Super G3) CCD flatbed scanning 8 x 3. When using the RSPF Maximum One-sided original: 216 mm x 500 mm Two-sided original: 216 mm x 356 mm Minimum 216 mm x 140 mm When using the document glass Maximum A4 216 mm maximum 256 levels Light, Medium, Dark Possible (1 telephone) Combined total of 18 One-Touch Dial and Group keys; 100 Speed Dial numbers; redialing (automatic) Yes Yes (50 pages) 2 MB Yes *1 When making multiple duplex copies, the copy speed will vary based on the environment conditions. 250-sheet paper feed unit (MX-CS10) (Option) Paper size Paper weight Paper capacity Weight Dimensions Power supply A5 to A4 56 g/m2 to 80 g/m2 One paper tray with capacity for 250 sheets of 80 g/m2 bond paper Approx. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. [. . . ] 99 kopior; subtraherande räkneverk 8 sekunder (När användarprogram 24 är AV) 10, 7 sekunder (När användarprogram 24 är PÅ) (papper: A4, exponeringsläge: AUTO, återgivning: 100%) Cirka 0 s Dokumentglas: Variabel: 25% till 400% i steg om 1% (sammanlagt 376 steg) Fasta förinställningar: 25%, 50%, 70%, 86%, 100%, 141%, 200%, 400% RSPF: Variabel: 50% till 200% i steg om 1% (sammanlagt 151 steg) Fasta förinställningar: 50%, 70%, 86%, 100%, 141%, 200% Dokumentglas: Rörlig optisk källa, spaltexponering (stationär vals) med automatisk exponeringsfunktion RSPF: Flyttar original En automatisk dokumentmatare och en extra papperskassett (250 ark) + handinmatningsfack (50 ark) Värmerullar Magnetisk borste CCD-ljuskälla med tre färger (CCD: 3 komponenter; R, G och B) Skanning: 600 x 300 dpi, Utmatning: 600 x 600 dpi (AUTO/TEXTläge) Skanning: 600 x 600 dpi, Utmatning: 600 x 600 dpi (FOTOläge) 256 toner (8 bitar) Lokal nätspänning ±10% (se namnplåten på enhetens baksida angående gällande strömförsörjningskrav). Pappersformat Pappersvikt Papperskapacitet Vikt Yttermått Strömförsörjning A5 till A4 56 g/m 2 till 80 g/m2 En papperskassett med kapacitet för 250 ark 80 g/m 2 finpapper Ca 3 kg 498 mm (b) x 445 mm (d) x 88 mm (h) Strömförsörjs via enheten Use only the line cable that was provided with the machine. This equipment has been designed to work on the British analogue public switched telephone network. This equipment has been tested according to the pan-European ES 203 021 regulation. [. . . ]