User manual SHARP AN-WC11B

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP AN-WC11B. We hope that this SHARP AN-WC11B user guide will be useful to you.


SHARP AN-WC11B : Download the complete user guide (2465 Ko)

You may also download the following manuals related to this product:

   SHARP AN-WC11B (2437 ko)
   SHARP AN-WC11B (2549 ko)
   SHARP AN-WC11B (2437 ko)
   SHARP AN-WC11B (2556 ko)
   SHARP AN-WC11B (2549 ko)
   SHARP AN-WC11B (2556 ko)

Manual abstract: user guide SHARP AN-WC11B

Detailed instructions for use are in the User's Guide.

[. . . ] Wireless LAN PC Card AN-WC11B OPERATION MANUAL Make sure to read this manual thoroughly in order to correctly use this product. For Windows 1. Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · When changing the SS ID, enter SS ID in the "SS ID" field. · When setting the encryption key, refer to "10. 3 Encryption Tab" on page 25. 11 Click "Apply". 12 Click box. To communicate again with the access point: When setting in the following way, you will be able to communicate again with the access point. (For more information about the settings, please refer to the Windows user's guide. ) · In the "Configuration" tab (step 10 above), select "Access Point" in "Network Type". on the upper right of the screen to close the "Configuration Utility" dialog -19 10. Configuration Utility · When using together with the projector PG-M25X, the software included with the projector (such as "Network Selector") will automatically make all the appropriate settings. Therefore, it is not necessary to make any settings in this utility program. After the installation of the "Wireless LAN PC Card Configuration Utility", the "Configuration Utility" icon appears in the task bar. The "Configuration Utility" icon The color behind the icon indicates the transmission status. Due to weak signals, transmission may not be possible. Transmission Speed becomes slower, even if transmission has been enabled. Transmission can be done normally. You can also view the status of the transmission by placing the cursor over the "Configuration Utility" icon. -20 10. 1 "Status" Tab The "Status" tab displays information on the status of your communications with the wireless LAN. The fields in this menu provide the following information: · State: Shows the association state of your computer with the wireless LAN. When operating in "Access Point", this field shows the MAC address of the Access Point with which you are communicating. When operating in "Peer-to-Peer", this field shows the virtual MAC address used by computers connected to the AdHoc network. In "Access Point", this number changes as the transmitter scans the available channels. You can click the "Rescan" button to force the transmitter to rescan all available channels. If your "Link Quality" or "Signal Strength" is "Poor", rescanning can be used to push the transmitter away from a weak Access Point and search for a better link with another Access Point. Shows the short term transmission and reception throughput in bytes/ second, and is continuously updated. The "Signal Strength" is displayed as a value and a graph. · Current Tx Rate: · Current Channel: · Rescan: · Throughput: · Link Quality: · Signal Strength: · Disable/Enable Radio: Switches On or Off the Power Save Mode when pressed. When activated, the Power Save Mode reduces the amount of energy consumed. The transmission speed via a wireless LAN is reduced, when the Power Save Mode is enabled. -21 10. 2 "Configuration" Tab In the "Configuration" tab, you can configure the Wireless LAN PC Card. After installing the "Configuration Utility", and after the computer has been started, this dialog box will be displayed. I Setting the Profile Profiles are files that have various settings of the Wireless LAN PC Card. If the settings that you normally use are saved every time as profiles, you can easily modify all at once just by selecting a profile. Click the pull down button on the right of the "Profile Name" box, to see the profiles that can be selected. Selecting and modifying a profile at once 1 2 Click the pull down button on the right of the "Profile Name" box. The profiles that can be selected are displayed. Select the profile from the list and click "Apply". The settings in the profile are modified at once. Right after installation, the profile is only "Default. " Creating a new profile 1 2 3 1 2 3 Change the values for the new profile. Click next to the "Profile Name" box, and enter the profile name. Click "Apply". The new profile is saved under the entered name. Modifying the saved profile Click the pull down button on the right of the "Profile Name" box. Profiles that can be selected are displayed in a list. Select the profile from the list. The set values are temporarily displayed. Change the set value and click "Apply". The current settings are overwritten. You can also modify a "Default" profile. -22 I Setting the SS ID The SS ID is used by Access Points and Wireless LAN PC Cards to identify a wireless LAN. [. . . ] 21 Signal strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 SS ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Subnet mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP AN-WC11B




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP AN-WC11B will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.