User manual SHARP AQUOS LC-15L1U-S OPERATION MANUAL

[. . . ] SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIN MANUAL DE OPERAO Printed on 100% post-consumer recycled paper. Papel 100% Reciclado-Cuidado do Meio Ambiente. Printed in Japan Imprim au Japon Impreso en Japn Impresso no Japo TINS-B124WJZZ 04P02-### PORTUGUS LIQUID CRYSTAL TELEVISION TLVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LQUIDO TELEVISOR DE CRISTAL LQUIDO ESPAOL FRANAIS LC-15L1U ENGLISH LC-15L1U LC-15L1U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No. : Serial No. : U. S. A. ONLY IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] If you know the Channel of the EDS signal carrier in your area, set "EDS CH SET" to "MANUAL" and select "START". In case, the message "EDS CH (XXX) EDS DATA IS NOT AVAILABLE" displays, set "EDS CH SET" to "AUTO" when the AUTO CLOCK Setting screen appears. If broadcasting channels are not memorized, EDS signals cannot be received even when the "EDS CH SET" is set to "AUTO". (See page 43. ) 25 ENGLISH SETTING THE CLOCK (Continued) MANUAL CLOCK Setting If there are no channels with EDS signals, set the clock manually using MANUAL CLOCK. POWER 1 DISPLAY PIC. Press a/b to move the cursor to "SET UP", and press ENTER. SLEEP ENTER 2 ENTER/ a/b/c/d MENU SLEEP T IMER V I DEO ADJUST PRESET CLOSED CAPT I ON VCH I P BLOCK SET UP MUTE BRIGHT TV/VIDEO MENU FLASHBACK VOL CH SELECT : ENTER : ENTER SET UP EX I T : MENU MENU 3 Press a/b to move the cursor to "CLOCK", and press ENTER. RETURN BLUE SCREEN LANGUAGE CHSETT I NG CLOCK [ OFF ] SELECT : ENTER : ENTER CLOCK EX I T : MENU 4 Press a/b to move the cursor to "MANUAL CLOCK", and press ENTER. RETURN AUTO CLOCK MANUAL CLOCK OFF 5 6 Press a/b to move the cursor to "TIME", and press ENTER. SELECT : ENTER : ENTER EX I T : MENU Press c/d to set the time, and press ENTER. 12:00AM 11:59PM 11:59AM 12:00PM MANUAL CLOCK RETURN T IME [ 12: 0 0AM] DST [OFF ] Note: Make sure to press ENTER after adjusting the time. Otherwise, the time will not be set. ADJUST : ENTER : ENTER EX I T : MENU 7 Press MENU to return to the main screen. Daylight Saving-Time (DST) Adjustment The Daylight Saving-Time changes as shown below. Set the "DST" to "ON" to forward the clock by 1 hour. To rewind the clock by 1 hour, set the "DST" to "OFF". finishes. 1:00AM 2:00AM 3:00AM 4:00AM 1:00AM 2:00AM 26 TV SIGNALS IN YOUR REGION This product is factory set to comply with the TV broadcasting system in the United States. The VIDEO INPUT mode is compatible with color systems worldwide and is automatically set. Country TV broadcasting system Color: NTSC TV ch: US ch Color: NTSC TV ch: US ch Factory setting of color system TV NTSC (N358) US ch NTSC (N358) US ch User setting TV Not required or N/A Not required or N/A The World Multi Auto System is compatible with all color systems indicated below. 1 2 3 4 5 6 7 N358 N443 PAL PAL-M PAL-N SECAM PAL-60 Video World Multi Auto System World Multi Auto System U. S. A. Canada 27 ENGLISH BATTERY CHARGE and TRANSMISSION SETTING Battery Charge The "BATTERY CHARGE" is set to "ON" when shipped from the factory. The battery will deteriorate if it continues to be charged after having been fully charged. It is recommended to set the "BATTERY CHARGE" to "OFF" when the battery is not used frequently. POWER DISPLAY SLEEP PIC. Press a/b to move the cursor to "PRESET", and press ENTER. ENTER MUTE BRIGHT TV/VIDEO MENU MENU SLEEP T IMER V I DEO ADJUST PRESET CLOSED CAPT I ON VCH I P BLOCK SET UP FLASHBACK VOL CH SELECT : ENTER : ENTER EX I T : MENU MENU 3 4 5 Press a/b to move the cursor to "BATTERY CHARGE", and press ENTER. Press MENU to return to the main screen. PRESET RETURN TRANSMISSION SETTING BR I GHTNESS [ BR I GHT ] [ STEREO] MTS ] AUTO POWER OFF [ OFF [ NORMAL ] P I CTURE FL I P [ IN ] AV2 I N / OUT BATTERY CHARGE SELECT : ENTER : ENTER EX I T : MENU Transmission Setting When shipped from the factory, the "CHANNEL" of the "TRANSMISSION SETTING" is set to "AUTO", and the "DISTANCE" is set to "NEAR". However, when reception is poor due to the presence of an interference source in close proximity, change the settings for "CHANNEL" or "DISTANCE" to ensure normal reception. AC wall outlet AC cord AC adapter Transmission Wireless Center [1] Preparing for "TRANSMISSION SETTING" TV main unit 1 2 3 4 Connect the antenna to the Wireless Center. Press MENU to display the MENU screen. NOW ACCESSING. 28 BATTERY CHARGE and TRANSMISSION SETTING (Continued) Transmission Setting (Continued) 5 POWER Press a/b to move the cursor to "PRESET", and press ENTER. MENU SLEEP T IMER V I DEO ADJUST PRESET CLOSED CAPT I ON VCH I P BLOCK SET UP DISPLAY SLEEP PIC. FLIP ENTER SELECT : MUTE BRIGHT TV/VIDEO MENU FLASHBACK VOL CH ENTER : ENTER EX I T : MENU ENTER/ a/b/c/d 6 Press a/b to move the cursor to "TRANSMISSION SETTING", and press ENTER. MENU PRESET RETURN TRANSMISSION SETTING BR I GHTNESS [ BR I GHT ] [ STEREO] MTS ] AUTO POWER OFF [ OFF [ NORMAL ] P I CTURE FL I P [ IN ] AV2 I N / OUT BATTERY CHARGE SELECT : ENTER : ENTER EX I T : MENU [2] Setting Channel Four settings can be selected for the communication channel consisting of Auto, A, B and C. When set to "AUTO", available channels that can be transmitted are set automatically. It is recommended to normally set the communication channel to "AUTO". AUTO A B C 1 Press a/b to select "CHANNEL", and then press ENTER. TRANSMISSION SETTING RETURN CHANNEL [ A] STATUS : A D I STANCE [ FAR] STATUS : NEAR SELECT : ENTER : ENTER EX I T : MENU 2 Press c/d to select "AUTO", and then press ENTER. The available settings change in the order shown below each time c/d is pressed. TRANSMISSION SETTING RETURN CHANNEL [ AUTO ] D I STANCE [ FAR] STATUS : NEAR AUTO A B C SELECT : ENTER : ENTER EX I T : MENU "ADJUSTING CHANNEL SETTING. " is displayed on the screen and the communication channel is set automatically. ADJUSTING CHANNEL SETTING. Displayed in yellow 29 ENGLISH BATTERY CHARGE and TRANSMISSION SETTING (Continued) Transmission Setting (Continued) [3] Setting Distance Select the Distance mode that gives the best reception and picture quality. [. . . ] The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. [. . . ]