User manual SHARP AQUOS LC-26GD4U OPERATION MANUAL

[. . . ] LC-37GD4U LC-32GD4U LC-26GD4U LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LIQUIDO OPERATION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN ESPAÑOL FRANÇAIS ENGLISH LC-37GD4U LC-32GD4U LC-26GD4U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL · The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. They are not selectable. IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No. : Serial No. : IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Small ­ Medium ­ Large. Recording a motion picture Use this setting to record images you are currently watching. Mode Use this setting for recording images you are currently watching. You can select the recording mode (picture quality) for a motion picture. 1 1 Press REC to start recording. · CARD indicator lights up red. · Recording information displays in the lower right corner of the screen. Press CARD and the card mode screen displays. Press MENU and the MENU screen displays. 2 3 2 Press H to stop recording. Press c/d to select "Card Setup". NOTE The list of broadcasting type or input signal not available for recording: 1 COMPONENT input 2 HDMI input 3 DVI-I input 4 Card picture 5 Copy guarded signal 6 V-chip blocked program 7 i. LINK input 8 DTV Program 4 5 Press a/b to select "Video Setup" and then press ENTER. Mode Pre Record Repeat Play File Operation SP LP EP To display the remaining record time. Press DISPLAY while not recording. · Remaining record time displays in the lower right corner of the screen. NOTE · Do not remove the AC cord from the socket. · Recording stops if you press POWER on the remote control while recording. · When card has no capacity for recording, "Card is full" displays and stops recording. · You cannot change the channel or switch the input source while recording. 6 Press a/b to select the desired mode, and then press ENTER. 47 Using memory card Pre Record You can record the picture slightly before the point where you pressed the record button, enabling you to record just the scene you wanted. Protecting/unprotecting motion picture files You can protect any file you do not want to delete. 1 2 Press CARD and the card mode screen displays. Press MENU and the MENU screen displays. 1 2 Repeat steps 1 to 4 in Rec. Mode. Press a/b to select "Pre Record", and then press ENTER. Rec. Mode Pre Record Repeat Play File Operation On Off 3 4 Press c/d to select "Card Setup". Press a/b to select "Video Setup", and then press ENTER. Press a/b to select "File Operation", and then press ENTER. Rec. Mode Pre Record Repeat Play File Operation Protect Delete File Delete All 5 3 Press c/d to select "On", and then press ENTER. Repeat Play You can specify one file or all files to replay repeatedly. 1 2 3 Repeat steps 1 to 4 in Rec. Mode. 6 Press a/b to select "Protect", and then press ENTER. Press a/b/c/d to select the file you want to protect, and then press ENTER. · Protect mark ( ) displays. · Select the file with a protect mark and press ENTER to cancel file protect. Press a/b to select "Repeat Play", and then press ENTER. Plays back all movie files on the card then repeats. 7 Selected item Off File All 8 9 Repeats the operation in step 4. After setting the files you want to protect, press RETURN to return to MENU. 48 Using memory card Deleting a motion picture file Format 1 2 3 Repeat step 1 to 5 in Protecting motion picture files. Press a/b/c/d to select the file you want to delete, and then press ENTER. Repeat the operations in steps 7 and 8 above. 1 2 3 4 Press MENU and the MENU screen displays. Press c/d to select "Card Setup". Press a/b to select "Format" and then press ENTER. Press c/d to select "Yes", and then press ENTER. 4 5 6 Yes No After deleting the images you no longer need, press RETURN to return to MENU. NOTE · You cannot delete a protected file on the card. · Do not turn off the power or take out a card when deleting a file. [. . . ] In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you. Model Specific Section Your Product Model Number & Description: LC-37GD4U · LC-32GD4U · LC-26GD4U LCD Color Television (Be sure to have this information available when you need service for your Product. ) One (1) year parts and labor from the date of purchase. [. . . ]