User manual SHARP AR-651 OPERATION MANUAL

[. . . ] MODEL AR-651 AR-810 DIGITAL COPYING MACHINE OPERATION MANUAL Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. In some areas, the "POWER" switch positions are marked "I" and " " on the copier instead of "ON" and "OFF". The symbol " " denotes the copier is not completely de-energized but in a stand-by condition at this "POWER" switch position. If your copier is so marked, please read "I" for "ON" and " " for "OFF". [. . . ] - X2 Distance from the top left to the right edge of the specified area. - Y1 Distance from the top left to the upper edge of the specified area. - Y2 Distance from the top left to the lower edge of the specified area. Four rectangular areas can be specified on an original. 6 7 8 9 Enter the distance values read in step 5 for the specified area. - Key in the value for X1 with the digital keys and press the upper SET key. - When setting X1, X2, Y1 and Y2, the original scale automatically changes to the next original scale. Set the next original scale as same procedure. 6 7 8 Press the lower SET key. (sheet original Page 2-10) - Place the original(s) on the glass with the face down, with its bottom toward you, with its top left aligned against the original scale on the left side. Select other copy modes as required. 9 10 11 12 Press the START key. 4-9 5. IMAGE EDITING (Cont. ) Mirror Image 1 2 3 4 5 6 7 8 9 10 Copies are made with images completely reversed in terms of right and left. 1 2 3 Place paper in the drawer(s). Page 2-4 - When using this mode in bypass copying, be sure to specify the paper size. Page 5-10, 5-11 Place the original(s). Page 2-9 Press the EDIT key to enter the edit menu, and press the EDITING key. 4 Press the MIRROR key. Select other copy modes as required. 11 12 5 Press the START key. 4-10 USING THE EDITING FUNCTIONS Negative/Positive Reversal The white area of originals copying black, and the black area of originals copying white. 1 2 3 1 2 3 Place paper in the drawer(s). Place the original(s). Page 2-9 Page 2-4 4 5 6 7 Press the EDIT key to enter the edit menu, and press the EDITING key. 4 Press the NEG/POS key. 8 9 10 Select other copy modes as required. 5 Press the START key. 11 12 4-11 6. 2 IN 1 / 4 IN 1 This feature allows multiple originals to be reduced and copied onto a single sheet of which size is the same as the original. There are two modes: 2 IN 1 copying, where two originals are reduced and copied onto a single sheet, and 4 IN 1 copying, where four originals are reduced and copied onto a single sheet. In addition, duplex 2 IN 1 / 4 IN 1 modes are available, where four/eight originals can be copied to two sides of a single sheet of paper. * 2 IN 1/4 IN 1 duplex copying mode requires the optional automatic duplexer to be installed. 1 2 3 4 5 6 7 8 9 10 The combination of page arrangement differs depending on the direction of originals set on the reversing automatic document feeder. 2IN1 Originals Copy 4IN1 2IN1 DUPLEX SIDE 1 SIDE 2 4IN1 DUPLEX 11 12 SIDE 1 SIDE 2 When a copy is turned with the line --·--·-- as a pivot, originals are printed on side 2 (back face) as shown. 4-12 USING THE EDITING FUNCTIONS 1 Place paper in the drawer(s). Page 2-4 - When using this mode in bypass copying, be sure to specify Page 5-10, 5-11 the paper size. 1 2 3 4 To make copies onto paper which is not the same size as originals, press the ZOOM. . . key to enter the right menu, and press the size you desire. 2 3 Place the originals. Page 2-9 Press the EDIT key to enter the edit menu, and press the 2IN1/4IN1 key. 5 6 4 Select the type of image combination. - Press the 2IN1 (or 4IN1 DUPLEX ) key. 4IN1 , 2IN1 DUPLEX or 7 8 9 5 Select the type of the original. - Press the 1 SIDE (or 2 SIDE ) key. 10 11 Select other copy modes as required. 12 6 Press the START key. - When placing an original on the glass, perform steps 5 and 6 on page 2-3 as needed. 4-13 7. COPYING WITH ANNOTATION Copies are made with the current date and time, at which they are made, printed on the copy. 1 15. 11. 2002 14:54 3 4 5 6 7 8 9 10 Date and time printed at the bottom of the portrait copy Date and time printed at the top of the landscape copy 1 2 3 Place paper in the drawer(s). Place the original(s). Page 2-4 Page 2-9 Press the EDIT key to enter the edit menu, and press the ANNOTATION key. - If the desired function keys are not displayed, press the Next or Pre key to change the menu screen. 4 Select the orientation (Short edge or Long edge) and position (UPPER or LOWER) of the date and time to be printed. Then, press the SET key. Select other copy modes as required. 11 12 5 Press the START key. 4-14 USING THE EDITING FUNCTIONS 8. PAGE NUMBERING COPYING This feature allows numbers to be added at specified position to copies. 1 1 2 3 1 2 3 2 3 4 5 6 7 Page number printed at the bottom centre on the portrait copy. Page number printed at the top right on the landscape copy. 1 2 3 Place paper in the drawer(s). Page 2-4 Place the original(s). Page 2-9 Press the EDIT key to enter the edit menu, and press the PAGE NUMBER key. - If the desired function keys are not displayed, press the Next or Pre key to change the menu screen. 4 Select the orientation ( Short edge or Long edge ) and position of the page number to be printed. Then, press the SET key. 8 9 10 5 6 Key in the starting page number. - If the start page number is "1", just press the SET key. 11 12 Select other copy modes as required. Press the START key. 4-15 9. [. . . ] 1-2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Precautions for Using the Reversing Automatic Document Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14 R Recalling a Stored Combination of Copy Jobs to Make Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 STOP key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]