User manual SHARP AR-C170M

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP AR-C170M. We hope that this SHARP AR-C170M user guide will be useful to you.


SHARP AR-C170M : Download the complete user guide (6537 Ko)

You may also download the following manuals related to this product:

   SHARP AR-C170M (6324 ko)
   SHARP AR-C170M (3172 ko)
   SHARP AR-C170M (3172 ko)
   SHARP AR-C170M (2823 ko)
   SHARP AR-C170M (1420 ko)
   SHARP AR-C170M annexe 1 (2823 ko)
   SHARP AR-C170M annexe 2 (1371 ko)
   SHARP AR-C170M annexe 3 (1634 ko)
   SHARP AR-C170M annexe 4 (6324 ko)
   SHARP AR-C170M KEY OPERATORS GUIDE (1371 ko)

Manual abstract: user guide SHARP AR-C170M

Detailed instructions for use are in the User's Guide.

[. . . ] MODEL AR-C170M DIGITAL FULL COLOUR MULTIFUNCTIONAL SYSTEM OPERATION MANUAL (for general information and copier operation) Page · BEFORE USING THE PRODUCT · MANAGING THE MACHINE · PERIPHERAL DEVICES · BEFORE MAKING COPIES · BASIC PROCEDURE FOR MAKING COPIES · CONVENIENT COPY FUNCTIONS · MACHINE MAINTENANCE (FOR COPYING) · SPECIFICATIONS 1-1 2-1 3-1 4-1 5-1 6-1 7-1 8-1 Be sure to become thoroughly familiar with this manual to gain the maximum benefit from the product. Before installing this product, be sure to read the installation requirements and cautions sections. (Option) Duplex bypass / inverter unit and Stand / 3 x 500 sheet paper drawer Be sure to keep all operation manuals handy for reference including this manual, the "Operation manual for general information and copier operation" and operation manuals for any optional equipment which has been installed. In some areas, the "POWER" switch positions are marked "I" and " " on the copier instead of "ON" and "OFF". The symbol " " denotes the copier is not completely de-energized but in a stand-by condition at this "POWER" switch position. If your copier is so marked, please read "I" for "ON" and " " for "OFF". [. . . ] GTo prevent incorrect original size detection, original misfeeds or smudges on copies, use the following as a guide for feeding originals. Transparency film, tracing paper, carbon paper, thermal paper or originals printed with thermal transfer ink ribbon should not be fed through the document feeder. Originals to be fed through the feeder should not be damaged, crumpled or folded or have loosely pasted paper on them or cutouts in them. 4-5 SETTING ORIGINALS I When using the reversing single pass feeder I When using the document glass Open the document cover, place the original face down on the document glass, and then gently close the document cover. 1 Adjust the original guides to the size of the originals. Original size detector originals 2 Place thefeeder tray. document face up in the NOTES G Do not place any objects under the original size detector, because they may damage it or the original size may not be detected properly. G If an original has been placed in the document feeder tray of the reversing single pass feeder, remove it. Otherwise the original in the document feeder tray will be scanned instead of the original on the document glass. [ How to place the original ] Place the original in the appropriate position shown below according to its size. ( Centre the original on the centring scale. ) Original scale Centring scale A4 or 8½x11 A3 or 11x17 B4 or 8½x14 Set the originals all the way into the feed slot. Do not exceed the maximum height line marked on the original guide. Original scale Centring scale A4 R or 8½x11 R A5 or 5½x8½ NOTE Original size detection function One of the four groups of standard original sizes shown below can be selected for detection by the original size detection function. The setting can be changed using "ORIGINAL SIZE DETECTOR SETTING" in the key operator programs. (Page 11 of the key operator's guide. ) Detectable original sizes Document feeder tray (for reversing single pass feeding) or document glass 1 INCH - 1 11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"* 2 INCH - 2 11" x 17", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"* 3 AB - 1 A3, A4, A4R, A5, B4, B5, B5R 4 AB - 2 A3, A4, A4R, A5, B5, B5R, 8-1/2" x 13" * When the reversing single pass feeder is used, these sizes are only supported for one-sided originals. Group 4-6 SETTING ORIGINALS I Standard original setting orientation [Example 1] Document feeder tray Top Document glass Top Bottom Bottom [Example 2] Document feeder tray Document glass Place originals in the document feeder tray or on the document glass so that the top and bottom of the original is positioned as shown in the illustration. If not, staples will be incorrectly positioned and some special features may not give the expected result. Bottom Top Top Bottom * When the original is placed as shown in example 2 and stapling is to be performed, orient the top of the original as shown below. Document feeder tray Document glass 4 Top Bottom Bottom Top I Automatic copy image rotation - rotation copying If the orientation of the originals and copy paper are different, the original image will be automatically rotated 90° and copied. (When an image is rotated, a message will be displayed. ) If a function is selected that is not suitable for rotation, such as enlarging the copy to greater than A4 (8-1/2" x 11") size or staple sorting with the saddle stitch finisher, rotation will not be possible. [Example] Orientation of original Orientation of paper Copy after rotation Face down Face down GThis function operates in both the auto paper select or auto image mode. See page 15 of the key operator's guide. ) 4-7 CHAPTER 5 BASIC PROCEDURE FOR MAKING COPIES This chapter explains the procedures for using basic copy functions, including making normal copies and enlarging/reducing copies. Page NORMAL COPYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 G Copying from the reversing single pass feeder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 G Automatic two-sided copying from the reversing single pass feeder . . . . . 5-6 G Copying from the document glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 G Automatic two-sided copying from the document glass . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 EXPOSURE ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10 REDUCTION/ENLARGEMENT/ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12 G Automatic selection (auto image). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12 G Manual selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13 G XY ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15 SPECIAL PAPERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17 5-1 NORMAL COPYING This section describes the normal copying procedure. Copying from the reversing single pass feeder NOTE Certain restrictions exist depending on the amount of memory installed and the copy settings. (See "Copy mode output restrictions" and "Specifications for memory capacity and maximum number of originals" on page 5-4. ) I 1-sided copies of 1-sided originals Original Copy the originals 1 Place(page 4-6) in the document feeder tray. 5 Touch the [OK] key. 0 OK 2 Ensure that the 1-sided to 1-sided copy mode is selected. ORIGINAL A4 PLAIN B5 paper of the as the 6 Ensure thatautomaticallysame size(*Note) originals is selected. The selected tray will be highlighted or the AUTO A4 message "LOAD xxxxxx PAPER SELECT PAPER. " will appear. If the message appears, load paper in a paper 100% tray with paper of the required size. Even if the message above is displayed, copying can be performed onto the currently selected paper. Originals of a standard size (A3, B4, A4, A4R, B5, B5R or A5 (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 81/2" x 11"R or 5-1/2" x 8-1/2")) are set and the auto paper select function is enabled. If originals of a size other PLAIN than the sizes above are A4 to be copied, manually RECYCLED select the desired paper B4 size by touching the [PAPER SELECT] key A3 PLAIN and then touching the desired paper size selection key. [. . . ] 1-9 Setting originals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Setting the paper size - Bypass tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 - Extra size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 Setting the paper type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP AR-C170M




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP AR-C170M will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.