User manual SHARP AR-FX2

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP AR-FX2. We hope that this SHARP AR-FX2 user guide will be useful to you.


SHARP AR-FX2 : Download the complete user guide (110 Ko)

You may also download the following manuals related to this product:

   SHARP AR-FX2 (5184 ko)
   SHARP AR-FX2 (5184 ko)
   SHARP AR-FX2 OPERATION MANUAL (5184 ko)
   SHARP AR-FX2 (6244 ko)
   SHARP AR-FX2 annexe 1 (6244 ko)

Manual abstract: user guide SHARP AR-FX2

Detailed instructions for use are in the User's Guide.

[. . . ] To change modes, press the COPY/FAX key. FAX indicator COPY indicator COPY/FAX key The function of some operation panel keys and indicators depends on the mode selected. For detailed information, see manual for the function you are using. [Copier mode] [COPY/FAX key] [Fax mode] : You can use the copier function. : You can use the printer function. In copier mode: COPY indicator lights up In fax mode: FAX indicator lights up : You can use the fax function. When the following functions are in use, pressing the COPY/FAX key causes the unit to change modes after the operation in progress is finished. [. . . ] 6 -2) No Fax Sending Direct Sending Scanning a document for memory sending Memory sending Fax Reception Normal reception Printing received data Substitute reception Telephone Conversation in progress (P. You can perform multi access depending on the conditions No . . . . . . You cannot perform multi access 3 MULTI ACCESS Printing data during copying Print data is received, but cannot be printed right away, because copying has priority. When copying is finished the print data is printed under any of the following conditions. q You press the CLEAR ALL key q The auto clear time elapses (when set *) q 60 seconds elapses (when the auto clear time is not set *) Normal fax reception during copying Faxes are automatically received with substitute reception during copying. When copying is finished the faxes printed under any of the following conditions. q You press the CLEAR ALL key q The auto clear time elapses (when set *) q 60 seconds elapses (when the auto clear time is not set *) Printing received data during copying Received data cannot be printed right away, because copying has priority. When copying is finished the received data is printed under any of the following conditions. q You press the CLEAR ALL key q The auto clear time elapses (when set *) q 60 seconds elapses (when the auto clear time is not set *) Receiving a telephone call during copying You can receive a telephone call during copying. If the telephone call is a fax transmission you can interrupt the copy job to receive the fax. To interrupt the copy job to receive a fax, perform the following steps. 1 2 3 4 Press the CLEAR ALL key or the CLEAR key to interrupt copying. If there are documents in the single pass feeder or on the original table, remove them. Receving begins. Performing a copy job during printing When using copier mode or when selecting copier mode from fax mode, you can peform a copying job. Pending print data is held and after copying is finished, printing resumes. To interrupt the print job to copy, perform the following steps. 1 2 3 q q Confirm that copier mode is selected. (If the unit is in fax mode, press the COPY/FAX key) Make copier settings and press the START key. When the page currently being printed is finished, copying begins. After copying is finished, printing resumes under any of the following conditions. You press the CLEAR ALL key The auto clear time elapses (when set *) q 60 seconds elapses (when the auto clear time is not set *) * For information about setting the auto clear function, see the "User Programs" section of the copier operation manual. 4 MULTI ACCESS Receiving a telephone call during printing (when the extension telephone is connected to the TEL jack) You can receive a telephone call during printing. If the telephone call is a fax transmission you can interrupt the print job to receive the fax. To interrupt the print job to receive a fax, perform the following steps. 1 2 3 Confirm that fax mode is selected. (If the unit is in copier mode, press the COPY/FAX key) If there are documents in the single pass feeder or on the original table, remove them. [. . . ] The print data is printed after the received fax data finishes printing. Receiving a telephone call during the printing of received fax data You can receive a telephone call while printing received fax data. If the telephone call is a fax transmission you can interrupt the printing of received fax data to receive the incoming fax. To interrupt the printing of received fax data to receive a fax, perform the following steps. 1 2 3 Confirm that fax mode is selected. (If the unit is in copier mode, press the COPY/FAX key) If there are documents in the single pass feeder or on the original table, remove them. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP AR-FX2




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP AR-FX2 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.