User manual SHARP AY-12FHR

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP AY-12FHR. We hope that this SHARP AY-12FHR user guide will be useful to you.


SHARP AY-12FHR : Download the complete user guide (567 Ko)

You may also download the following manuals related to this product:

   SHARP AY-12FHR (592 ko)
   SHARP AY-12FHR (580 ko)
   SHARP AY-12FHR (2429 ko)

Manual abstract: user guide SHARP AY-12FHR

Detailed instructions for use are in the User's Guide.

[. . . ] In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. *) Please contact your local authority for further details. Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products. If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements. By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling. 2. [. . . ] the cover. + - 3 Reinstall + NOTES: · The battery life is approximately one year in normal use. · When you replace the batteries, always change both batteries, and make sure they are the same type. · If the remote control does not operate properly after replacing the batteries, take out the batteries and reinstall them again after 30 seconds. · If you will not be using the unit for a long time, remove the batteries from the remote control. HOW TO USE THE REMOTE CONTROL Point the remote control towards the unit's signal receiver window and press the desired button. The unit generates a beep when it receives the signal. · Make sure there is no curtain or other object between the remote control and the unit. · The remote control can send signals from up to 7 metres away. E-6 CAUTION · Do not allow the signal receiver window to receive strong direct sunlight, since it can adversely affect its operation. If the signal receiver window is exposed to direct sunlight, close a curtain to block the light. · Using a fluorescent lamp with a quick starter in the same room may interfere with transmission of the signal. · The unit can be affected by signals transmitted from the remote control of a television, VCR or other equipment used in the same room. · Do not leave the remote control in direct sunlight or near a heater. Also, protect the unit and remote control from moisture and shock which can discolour or damage them. SET CURRENT CLOCK TIME There are two clock modes: 12-hour mode and 24-hour mode. Mold fungus already grown can not be eliminated by this operation. 1 Press the SELF CLEAN button when the unit is not operating. · · · · The remote control displays " ". The remaining operation time will be indicated on the TEMPERATURE INDICATOR of the indoor unit in minute decrements. TO CANCEL MODE 1h CLEAN FAN 1 Press the SELF CLEAN button. Alternatively, turn the unit off by pressing the ON/OFF button. · The blue PLASMACLUSTER lamp on the unit will turn off. NOTE: · You cannot set the temperature, fan speed, air flow direction or timer setting during the SELF CLEAN operation. E-13 TIMER OPERATION NOTE: Before setting the timer, make sure the clock is properly set with the current time. TIMER OFF ) button. 1 Press the TIMER OFF ( 2 The TIMER OFF indicator will blink; press the TIME ADVANCE or REVERSE buttons to set the desired time. (The time can be set in 10minute increments. ) remote control at the signal receiver 3 Point theon the unit and press the TIMER SET window (SET/C) button. DISPLAY · The orange TIMER lamp ( ) on the unit will light. · The unit will generate a beep when it receives the signal. 1h MODE CLEAN FAN SWING SET/C 1 2 3 TO CANCEL TIMER MODE TIPS ABOUT TIMER OFF OPERATION When the TIMER OFF mode is set, the temperature setting is automatically adjusted to prevent the room from becoming excessively hot or too cold while you sleep. (Auto Sleep function) Press the TIMER CANCEL (SET/C) button. · The orange TIMER lamp ( ) on the unit will turn off. · The current clock 1h MODE time will be displayed on the reCLEAN mote control. FAN SWING SET/C COOL/DRY MODE: · One hour after the time operation begins, the temperature setting rises 1°C higher than the original temperature setting. HEAT MODE: · One hour after the timer operation begins, the temperature setting drops 3°C lower than the original temperature setting. NOTE: · If any TIMER ON, TIMER OFF and ONE-HOUR OFF TIMER are set, the TIMER CANCEL button cancels all settings. TO CHANGE TIME SETTING Cancel the TIMER setting first, then set it again. E-14 TIMER ON 1 Press the TIMER ON ( ) button. 2 The TIMER ON indicator will blink; press the TIME ADVANCE or REVERSE buttons to set the desired time. (The time can be set in 10minute increments. ) at the signal receiver 3 Point the remote controlpress the TIMER SET window on the unit and (SET/C) button. DISPLAY · The orange TIMER lamp ( ) on the unit will light. [. . . ] 2 Put the shaft at the left of the louvre in the shaft receiver of the unit. Make sure the shaft at the center of the louvre is placed in the center shaft receiver of the air outlet. 3 Close the left cover until it clicks. Hole 1 Shaft Shaft Receiver 2 2 5 Connect the poweroncord to the wall outlet or turn the circuit breaker. 3 Cover E-18 ADDITIONAL NOTES ON OPERATION OPERATING TEMPERATURE RANGE INDOOR TEMP. upper limit COOLING lower limit HEATING upper limit lower limit 32°C 23°C 21°C 15°C 27°C D. B. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP AY-12FHR




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP AY-12FHR will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.