User manual SHARP AY-XP12GR

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP AY-XP12GR. We hope that this SHARP AY-XP12GR user guide will be useful to you.


SHARP AY-XP12GR : Download the complete user guide (1117 Ko)

Manual abstract: user guide SHARP AY-XP12GR

Detailed instructions for use are in the User's Guide.

[. . . ] In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. *) Please contact your local authority for further details. Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products. If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements. By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling. 2. [. . . ] (Otherwise they may deteriorate. ) E-5 USING THE REMOTE CONTROL LOADING BATTERIES Use two size-AAA (R03) batteries. 1 Remove cover. the remote control Remote control cover batteries in 2 Insert making surethe compartment, the and -- polarities are correctly aligned. The display indicates "AM 6:00" when batteries are properly installed. the cover. + - 3 Reinstall + NOTES: The battery life is approximately one year in normal use. When you replace the batteries, always change both batteries, and make sure they are the same type. If the remote control does not operate properly after replacing the batteries, take out the batteries and reinstall them again after 30 seconds. If you will not be using the unit for a long time, remove the batteries from the remote control. HOW TO USE THE REMOTE CONTROL Point the remote control towards the unit's signal receiver window and press the desired button. The unit generates a beep when it receives the signal. Make sure there is no curtain or other object between the remote control and the unit. The remote control can send signals from up to 7 metres away. E-6 CAUTION Do not allow the signal receiver window to receive strong direct sunlight, since it can adversely affect its operation. If the signal receiver window is exposed to direct sunlight, close a curtain to block the light. Using a fluorescent lamp with a quick starter in the same room may interfere with transmission of the signal. The unit can be affected by signals transmitted from the remote control of a television, VCR or other equipment used in the same room. The remaining operation time will be indicated on the TEMPERATURE INDICATOR of the indoor unit in minute decrements. MODE 1h TO CANCEL CLEAN FAN 1 Press the SELF CLEAN button. Alternatively, turn the unit off by pressing the ON/OFF button. The blue PLASMACLUSTER lamp on the unit will turn off. You cannot set the temperature, fan speed, air flow direction or timer setting during the SELF CLEAN operation. NOTE: ONE-HOUR OFF TIMER When the ONE-HOUR OFF TIMER is set, the unit will automatically turn off after one hour. 1 Press the ONE-HOUR OFF TIMER button. The remote control displays " ". The unit will stop operating after one hour. TO CANCEL Press the TIMER CANCEL (SET/C) button. MODE 1h 1 The orange TIMER lamp ( ) on the unit will turn off. CLEAN FAN Alternatively, turn the unit off by pressing the ON/ OFF button. The red OPERATION lamp ( ) and the orange TIMER lamp ( ) on the unit will turn off. NOTES: The ONE-HOUR OFF TIMER operation has priority over TIMER ON and TIMER OFF operations. If the ONE-HOUR OFF TIMER is set while the unit is not operating, the unit will operate for an hour at the formerly set condition. If you wish to operate the unit for another hour before the ONE-HOUR OFF TIMER is activated, press the ONE-HOUR OFF TIMER button again during operation. If TIMER ON and/or TIMER OFF are set, TIMER CANCEL button cancels every setting. E-13 TIMER OPERATION NOTE: Before setting the timer, make sure the clock is properly set with the current time. TIMER OFF ) button. 1 Press the TIMER OFF ( 2 The TIMER OFF indicator will blink; press the TIME ADVANCE or REVERSE buttons to set the desired time. (The time can be set in 10minute increments. ) remote control at the signal receiver 3 Point theon the unit and press the TIMER SET window (SET/C) button. DISPLAY The orange TIMER lamp ( ) on the unit will light. The unit will generate a beep when it receives the signal. 1h MODE CLEAN FAN SWING SET/C 1 2 3 TO CANCEL TIMER MODE TIPS ABOUT TIMER OFF OPERATION When the TIMER OFF mode is set, the temperature setting is automatically adjusted to prevent the room from becoming excessively hot or too cold while you sleep. (Auto Sleep function) Press the TIMER CANCEL (SET/C) button. The orange TIMER lamp ( ) on the unit will turn off. [. . . ] rack 3 Check the outdoor mountingmake periodically for wear and to sure it is firmly in place. CHANGING THE DEODORANT DUST COLLECTION FILTER The filter should be changed every 3 ~ 6 months Filter stopper 1 REMOVE THE AIR FILTER 2 CHANGE THE DEODORANT COLLECTION FILTER DUST 1 Take off the old deodorant dust collection filter from the air filter. 2 Set the new deodorant dust collection filter, under the filter stoppers located on the air filter. 3 REINSTALL THE AIR FILTER NOTE: The dirty deodorant dust collection filter is not washable for reuse. The new filter is available at your nearest dealer. Replacement filter: Type AZ-F920FN Disposal of Filters Please dispose of replaced filters according to the local disposal laws and regulations. DEODORANT DUST COLLECTION Filter materials: Filter: Polypropylene Frame: Polyester E-17 ADDITIONAL NOTES ON OPERATION OPERATING TEMPERATURE RANGE INDOOR TEMP. upper limit COOLING lower limit upper limit HEATING lower limit 32C 23C 21C 15C 27C D. B. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP AY-XP12GR




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP AY-XP12GR will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.