User manual SHARP DV-NC230(RU)

[. . . ] MODEL DV-NC230(RU) OPERATION MANUAL Please read this Operation Manual carefully before using your VCR/DVD COMBINATION. DV- N C 2 3 0 OPERATE OPEN/CLOSE PULL OPEN REW FF STOP/ EJECT OUTPUT PLAY REC TIMER (TRACKING) CH VCR DVD STOP PLAY 5 PAL ­1­ EN INFORMATION The region number for this VCR/DVD is 5. DVD FUNCTIONS VCR FUNCTIONS SETUP PREFACE PRECAUTIONS VCR/DVD COMBINATION PRECAUTIONS SAFETY INFORMATION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPARATUS TO DRIPPING OR SPLASHING, NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD BE PLACED ON THE APPARATUS. Laser Diode Properties Material: GaAs Wave length: DVD: 655 nm CD: 790 nm Emission Duration: Continuous Laser output: Max. 0. 8 mW Power Cord Protection To avoid any malfunctions of the VCR/DVD, and to protect against electric shock, fire or personal injury, please observe the following. · Hold the plug firmly when connecting or disconnecting the AC power cord. [. . . ] You don't need to set the TIMER off to use the DVD. · Once the VCR/DVD turns to the timer standby mode, no VCR functions are available until TIMER ON/OFF is pressed. (OUTPUT on the front panel and VCR on the remote control will not function. ) ­ 17 ­ EN VCR FUNCTIONS · You can programme one year in advance. · You can also select the recording routine option by pressing Cursor K / L when the month digit is flashing. Those programmes can only set a recording according to the same channel at the same time. - For daily recording : Select "MO-FR" to recording from Monday through Friday. - For everyday recording : Select "MO-SU" to recording everyday. - For weekly recording : Select "W-MO" to recording every week. W-MO : every Monday) Hint · If you have not set the clock yet, CLOCK setting menu appears. If so, follow the steps outlined in the "Clock Set Up" on page 12. · If you do not press Cursor B within 5 seconds of setting an item, the input mode will move to the next step. · Press Cursor { to go back one step from the current setting during steps 3 to 7. Press Cursor K / L to select the programme number which you want to check. · You may cancel the entire programme by pressing Cursor s while the programme number flashes. Press TIMER ON/OFF to return to the timer standby mode. When an OTR or a Timer Recording is completed. . . · If the other Timer Recordings remain as programmed, the VCR/DVD switches to the DVD mode automatically, and the TIMER indicator on the front panel lights up to indicate the VCR/DVD is in the timer standby mode. In some occasions, however, the VCR/DVD may be automatically turned off, instead of changing to the DVD mode after pressing TIMER ON/OFF. · When you use the VCR/DVD in DVD mode during an OTR or a Timer Recording, the VCR/DVD will not turn off automatically even if the end time of the OTR or Timer Recording has been past. Note (for Timer Recording) : · If there is a power failure or the VCR/DVD is unplugged for more than 1 hour, clock and all timer settings will be lost. · The TIMER indicator on the front panel flashes if there are no more Timer Recordings on standby. If you want to use the VCR function, press TIMER ON/OFF on the remote control or STOP C/EJECT A on the VCR/ DVD. Then press VCR to activate the VCR function. To avoid overlap of Timer Programming . . . · A timer programme will not work while another programme is under execution. Programme 1 Programme 2 Programme 3 9:00 10:00 11:00 · Once the VCR/DVD switches to the DVD mode, all the VCR function will be unavailable. All the DVD functions are available during OTR, timer standby mode and Timer Recording. Direct Dubbing VC R DVD 1 4 7 2 5 8 0 3 6 9 +10 P LAY S TOP press first. 5. Recording starts. VCR/DVD COMBINATION NA527AD Refer to page 7 to switch between the VCR mode and the DVD mode. Insert a tape. · If necessary, rewind or fast forward the tape to the point at which you want to begin recording. 6. Playback starts. 2. Insert a disc with label facing up. 7. To Stop Recording. To Stop Playback. 3. Press 0, 0, 4 to select DISC. DISC or TV Screen Hint · Press STILL/PAUSE F at the point where you want to start recording when you do dubbing middle of the DVD. [. . . ] This VCR/DVD does not respond to · Check if the power plug is connected to an AC outlet. If necessary, remove all the obstacles between the sensor and the remote. If it's not in the right mode, press DVD or VCR, whichever you need, on the remote control. · Make sure the TIMER indicator and " " appear on the VCR/DVD. [. . . ]