User manual SHARP ER-01PU

[. . . ] /PLU when you change the currency to EURO When you make the automatic modification operation for EURO (#800) in the X2/Z2 mode with the substitution of 2 or 3 for "A" (i. [. . . ] The conversion rate applied for this automatic conversion is the preset rate of the e key, and the conversion method is set to "division". (Please read your instruction manual for details about the automatic modification operation for EURO on pages 37 and 38. ) However, if you have already made the operation with the substitution of 2 for "A", and you make the operation with the substitution of 3 for "A", the automatic conversion of unit prices of Dept. When the automatic conversion has been made, the message "PRICE CONVERTED" will be printed as follows. When the above-mentioned preset date and time has come, and also when you start an entry in the REG/MGR mode, the error message " " is displayed. You cannot make any operation in the REG/MGR mode until you execute the automatic modification operation for EURO (job #800) in the X2/Z2 mode. You can program so that you can make entries in the REG/MGR mode even when the error message is displayed. Date and time setting will be reset after the execution of the automatic modification operation and you can program again the date and time for the next automatic modification operation. [. . . ] Date and time setting will be reset after the execution of the automatic modification operation and you can program again the date and time for the next automatic modification operation. [. . . ]