User manual SHARP FU-S51E

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP FU-S51E. We hope that this SHARP FU-S51E user guide will be useful to you.


SHARP FU-S51E : Download the complete user guide (10930 Ko)

You may also download the following manuals related to this product:

   SHARP FU-S51E (1754 ko)
   SHARP FU-S51E (2155 ko)
   SHARP FU-S51E (2343 ko)
   SHARP FU-S51E annexe 3 (1754 ko)
   SHARP FU-S51E annexe 1 (2411 ko)
   SHARP FU-S51E annexe 1 (1754 ko)
   SHARP FU-S51E annexe 3 (2410 ko)
   SHARP FU-S51E annexe 1 (2410 ko)
   SHARP FU-S51E annexe 3 (2411 ko)
   SHARP FU-S51E annexe 2 (2343 ko)
   SHARP FU-S51E annexe 2 (2155 ko)
   SHARP FU-S51E annexe 1 (487 ko)
   SHARP FU-S51E annexe 3 (487 ko)
   SHARP FU-S51E OPERATION MANUAL (487 ko)

Manual abstract: user guide SHARP FU-S51E

Detailed instructions for use are in the User's Guide.

[. . . ] Approximately the same numbers of positive and negative ions are discharged. The unit will switch between Clean Mode and Ion Control Mode* automatically depending on the amount of impurities in the air detected by the odour and dust sensors. Before using this product, be sure to read the section: "Important Safety Instructions. " After reading this manual, retain it in a convenient location for future reference. [. . . ] DETERMINING THE BASE IMPURITY RATE For the first 30 seconds after the power plug is inserted into the wall outlet, the unit will check the conditions of the air. If operation is set to ON during this time, the CLEAN-SIGN LIGHT will alternately flash in green, yellow and red. To maintain the quality of the filters, they are installed in the main unit and packed in plastic bags. Be sure to remove the filters from the plastic bags before using the unit. From 5 Remove the Active Carbon Filter from the carton box, and also remove the plastic bag. Please make sure that the HEPA Filter(blue) and the tab is placed in proper direction. Do not install the filter backwards or the unit will not operate properly. Place the Front Panel from the obliquely upward, then mount the hooks at the bottom. Unless unplug the power cord, the operation starts in the previous mode the unit was operated in. When stop operation during ION SHOWER Operation, the unit will back to the prior operation of ION SHOWER Operation. The unit will operate at HIGH* fan speed for 10 minutes, then will alternate between MEDIUM and HIGH* for 20 minutes. 10 minutes: HIGH fan speed 20 minutes: MEDIUM fan speed 20 minutes: HIGH fan speed The unit will operate at a fan speed of MEDIUM. ) The concentrated Plasmacluster Ions (ION SHOWER) will be generated in the room like a shower for 15 minutes, repeating the airflow cycles between strong and gentle. (The Plasmacluster Indicator Light repeats its colour cycles between blue and green. When the operation finishes, the unit will return to the prior operation. When pushing the ION SHOWER button while the ION SHOWER operation mode is working, the unit will return to the prior operation. The unit will switch between Clean Mode and the Ion Control Mode* automatically depending on the amount of impurities in the air as detected by the dust and odour sensors. Clean Mode will operate for 10 minutes when the Auto function is selected. The unit will constantly operate in the Clean Mode, in which the same numbers of positive and negative ions are discharged. To maintain optimum performance of this air purifier, please clean the unit including the sensor and filters periodically. When cleaning the unit, be sure to unplug the power cord, and never handle the plug with wet hands. Care Cycle 1 month To prevent dirt or stains on the main unit, clean as often as necessary. [. . . ] Plasmacluster Indicator Light (repeats colour cycles between blue and green ) The applicable floor surface area is appropriate for operating the unit at maximum fan speed. In other Countries outside the EU If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal. By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling. La condition du SIGNE NETTOYAGE dépend de la condition de l'air ambiant détecté par les capteurs de poussière et d'odeur lorsque la prise est insérée dans la prise murale. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP FU-S51E




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP FU-S51E will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.