User manual SHARP HT-SB350(W)/

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP HT-SB350(W)/. We hope that this SHARP HT-SB350(W)/ user guide will be useful to you.


SHARP HT-SB350(W)/ : Download the complete user guide (5777 Ko)

Manual abstract: user guide SHARP HT-SB350(W)/

Detailed instructions for use are in the User's Guide.

[. . . ] Nie wolno demontowa obudowy urzdzenia, poniewa stwarza to ryzyko poraenia prdem. Urzdzenie naley odlczy od sieci przed przystpieniem do jakiejkolwiek naprawy lub kiedy nie bdzie uywane przez dluszy czas. Urzdzenie naley chroni przed nadmiern wilgoci i zamoczeniem, eby unikn ryzyka wywolania poaru lub poraenia prdem. Nie wolno demontowa jego obudowy, a wszelkie naprawy naley zleca w autoryzowanym serwisie. [. . . ] Exit set up. Note: If you forget your password, cancel the current password by pressing "0000" using the Direct Search buttons. E-27 General control Volume auto fade-in If you turn off and on the main unit with volume set to 34 or higher, the volume starts at 20 and fades in to the last set level. If you turn off and on the main unit with the volume level set to less than 34, the volume starts at the last level volume setting. HT-DV40H3 HT-DV50H3 ENGLISH Volume control Volume ring 1 4 7 0 2 5 8 +10 3 6 9 Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. Remote control operation: Press the VOLUME (+ or ­) button to increase or decrease the volume. 0 1 . . . 39 MAX Subwoofer level control The subwoofer level can be adjusted. To increase the level, hold down the SHIFT button and press the SUBWOOFER LEVEL + button. To decrease the level, hold down the SHIFT button and press the SUBWOOFER LEVEL - button. To turn the power on Press the ON/STAND-BY button to turn the power on. After use: Press the ON/STAND-BY button to enter the power stand-by mode. -5 -4 . . . +4 +5 Illumination light control Press the MEMORY/DIMMER button for more than 2 seconds to adjust the brightness of the display and volume ring. Volume ring light and display bright Volume ring light off and display dim Volume ring light off and display gets dimmer Notes: When sound from the subwoofer is distorted, decrease the subwoofer level. When changing the subwoofer level, the output level of the SUBWOOFER PRE OUT is also changed. Function When the FUNCTION button on main unit is pressed, the current function will change to different mode. Press the FUNCTION button repeatedly to select desired function. DVD/CD SCART USB AUX IN TUNER OPTICAL 2 OPTICAL 1 Auto power off function In the stop mode of discs/USB operation, the main unit enters the stand-by mode after 15 minutes of inactivity. Note: The backup function will protect the memorised function mode for a few hours should there be a power failure or the AC power lead becomes disconnected. E-28 Basic Operation HT-DV40H3 HT-DV50H3 ENGLISH Setting the clock (Remote Control only) 5 1 4 7 0 2 5 8 +10 3 6 9 Press the or button to adjust the hour and then press the MEMORY/DIMMER button. Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. 6 Press the or button to adjust the minutes and then press the MEMORY/DIMMER button. Basic Operation In this example, the clock is set for the 24-hour (0:00) display. Press the or button once to advance the time by 1 minute. Press the SHIFT and SOUND MODE buttons simultaneously to select "TREBLE". Within 10 seconds, press the VOLUME (+ or ­) button to adjust the treble. -5 +5 E-31 Notes: The DVS default setting is "WIDE" mode. When setting the DVS mode to "WIDE" or "REFERENCE", the preset sound mode and Audistry (SOUND SPACE mode, MONO TO STEREO mode) are cancelled. (The NATURAL BASS mode and the INTELLIGENT VOLUME mode are not cancelled. ) Monaural signals do not generate surround effects. In case input signal is Dual mono type and DVS is set to "WIDE" or "REFERENCE", the sound may not be output correctly. When unit is turned on for the first time, selecting BASS mode using the SOUND MODE button will automatically set the DVS to OFF. Subsequently, when BASS mode is selected again, the DVS setting will follow the current user setting. When headphone is inserted, DVS setting and BASS/TREBLE setting, set earlier by user will be cancelled. However the DVS setting will not be recovered when the headphone is unplugged. HT-DV40H3 HT-DV50H3 Audistry sound mode ON The Dolby Virtual Speaker creates multichannel-like sound effects. Compared with the cinema mode, the bass sound level is slightly reduced. 3 1 2 5 8 +10 3 6 9 ENGLISH Enjoy a variety of sounds by each or any combination of the 4 modes. [. . . ] Note: If neither operation above restores the unit, clear all the memory by resetting it. Before transporting the unit Remove the CD from the unit. Carrying the unit with disc left inside can damage the unit. Factory reset, clearing all memory 1 2 Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the button, press the ON/STAND-BY button until "CLEAR ALL" appears. Tuner Symptom The radio makes unusual noises continuously. Move the aerial away from the AC power lead if it is located nearby. References Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, etc. ) or on the transmitter on the remote control. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP HT-SB350(W)/




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP HT-SB350(W)/ will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.