User manual SHARP HT-SB60
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP HT-SB60. We hope that this SHARP HT-SB60 user guide will be useful to you.
You may also download the following manuals related to this product:
SHARP HT-SB60 (4523 ko)
Manual abstract: user guide SHARP HT-SB60
Detailed instructions for use are in the User's Guide.
[. . . ] ENGLISH
MODEL
Special Notes
FCC Radiation Exposure Statement This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. It must not be co-located or operating in conjunction with any other antenna or transmitter. This device must accept any interference received, including interference that may cause undesired operation. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and personâs body (excluding extremities: hands, wrists, feet and ankles. [. . . ] Notes: â Refer to the operation manual of the equipment to be connected. Â Connecting via this method may disable TV internal speakers. Â In some cases, a small background noise could emit from the sound bar, when you use the headphone connection with a TV-Set. In such case, please change the connection to the HDMI/ARC or RCA-connection. This effect depends on the used TV-Brand, model and age, and it is not a quality matter from the sound bar. Caution: â Remove the battery if the sound bar will not be used for a long period of time. Â Installing the battery incorrectly may cause the sound bar to malfunction. Â Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Notes concerning use:
â Replace the battery if the operating distance is reduced
To turn the power on
Press the ON/STAND-BY button on the sound bar or the remote control. Â The power turns on and the subwoofer indicator turns blue. If the power does not turn on, check whether the AC power cord is plugged in properly. Â The system will automatically power on if TV or similar component which supports HDMI CEC, is turned on. To set the sound bar to stand-by mode: Press the ON/STAND-BY button again on the main unit or the remote control and the subwoofer indicator turns red. Notes: â A slight audio delay after TV is turned ON does not mean that the system is faulty. Â âAQUOS speaker is enabledâ message will be displayed if SHARP LCD TV does not detect HT-SB60 during power on. However the message âAQUOS audio with AQUOS LINK is enabledâ will be displayed soon as HT-SB60 is detected. vCR
DVD player
Subwoofer
To HDMI (TV ARC) input terminal
Place the system as shown. Remove the protective film covering the sound bar and subwoofer before turn on the system. to HDMI OUT (TV ARC) output terminal Stand
To HDMI input terminal
To HDMI output terminal
Sound Bar
Connecting a TV , or DVD player , etc. Method 2 This connection is for HDMI TV without ARC (Audio Return Channel). To HDMI input terminal TV To audio output terminal DVD, Blu-ray disc player or similar
System connections
Make sure to unplug the AC power cord before making any connections. Subwoofer
To audio output terminals
To Headphone terminal
To HDMI output terminal
or
To HEADPHONE terminal Audio signal
Blu-Ray/ DVD player/Digital Tuner Sound Bar Sound Bar To HDMI OUT (TV ARC) output terminal To HDMI input terminal To select HDMI 1, 2 or TV ARC function (Source): Press SOURCE button repeatedly until âHDMI 1â, âHDMI 2â or âTV ARCâ appears on the display, or press TV ARC button on the remote control to select the TV ARC. [. . . ] The sound bar will enter the power stand-by mode automatically if no signal is detected after the preset time has elapsed. Signals other than DOLBY DIGITAL, DTS, Linear PCM cannot be recognized. Output HDMI⢠output: (audio/video support up terminal to 1080p) x 1 Input terminal Analog input (AUDIO IN): x 1 500 mV / 47 kohms Optical digital input (OPTICAL): Square type x 1 HDMI input: (audio/video support up to 1080p) x 2 Type 2 Way speaker system 2 -1/4" (5. 5 cm) Soft Dome Maximum 160 W input power Rated input 80 W power Impedance 4 ohms
Volume auto fade-in
If you turn off and on the sound bar with the volume set to 80 or higher, the volume starts at 40 and fades in to the last set level. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP HT-SB60
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP HT-SB60 will begin.