User manual SHARP IMDR420 QUICK START GUIDE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP IMDR420. We hope that this SHARP IMDR420 user guide will be useful to you.
You may also download the following manuals related to this product:
SHARP IMDR420 OPERATION MANUAL (1164 ko)
SHARP IMDR420 BEATJAMS SOFTWARE INSTRUCTIONS (1070 ko)
SHARP IMDR420 BEATJAMS SOFTWARE READ BEFORE INSTALL (17 ko)
Manual abstract: user guide SHARP IMDR420QUICK START GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] Connect the AC adaptor
1-BIT PORTABLE MINIDISC RECORDER
Quick Start Guide
MODEL
To the wall socket
Plug the AC adaptor into the wall socket, and then insert the plug on the other end into the DC IN 3V socket.
Caution: Insert the plugs firmly. When the unit is not in use for extended periods, remove the AC adaptor from the wall socket.
IM-DR420H
If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/customersupport. [. . . ] SP (Stereo recording) (2 times long recording) (4 times long recording) (Monaural recording) 5 Press the MENU/ENTER button.
0 - 30
6 Press the 7 Begin
button to start recording.
Adjust the recording level so that the maximum sound volume from the source makes the reading swing somewhere between -4 dB and 0 dB.
playback on the stereo system, the output will be recorded.
4 Press the PAUSE button on the stereo system to enter the playback pause mode.
Here you can search for the track to be recorded.
Whilst "TOC" is displayed, the recorded contents are not yet updated. Hold down the HOLD button for 2 seconds or more.
Hold
Release
MD Playback 1 Insert the earphone plug
firmly into the earphone socket on the remote control.
Left channel L Right channel R
Net MD
Audio data saved on the hard disk of a PC can be transferred to a Net MD-compatible recorder using the provided software "BeatJam". Not only the basic operations but also the title editing of audio data on an MD can be performed via the PC.
1 Install
the software on your PC.
For details, refer to page 47 of the operation manual.
2 Plug
the remote control into the REMOTE/PHONES socket on the unit. button.
4-pole plug
MD portable recorder compatible with Net MD
2 Connect
3 Press the
your PC with the MD portable recorder with the supplied USB connection cable.
For details, refer to page 48 of the operation manual.
PC hard disk USB connection (BeatJam)
3 Perform operations with
BeatJam on the PC.
For details, refer to the BeatJam manual.
4 To
the
stop playback, press :OFF/HOLD button.
To the REMOTE / PHONES socket
Useful tips
Recording from a radio cassette recorder or stereo system without audio output sockets (LINE OUT, AUX OUT, REC OUT, etc. )
Use a headphone socket.
Commercially available connection cable Radio cassette recorder
NOTES
Digital and analogue recording
The differences are described below.
Digital recording
A digital signal from a CD or MiniDisc is recorded as it is on the original. Compared with analogue connection recording, a digital connection will ensure higher quality. OPTICAL OUT DIGITAL OUT
To the headphone socket
Analogue recording
Sound from a stereo system or radio cassette recorder (analogue signals) can be recorded. RL AUDIO/LINE OUT socket Headphone socket
This is analogue recording. Adjust the recording level manually.
Recording TV sound
Check the output terminal of your TV and connect to the unit as follows.
Adjusting the recording level
Adjust the recording level so that the maximum sound volume from the source makes the reading swing somewhere between -4 dB and 0 dB. TV
< Recording from an audio output socket >
White : to the left Supplied connection cable
-12dB
-4dB
0dB
Red : to the right To the AUDIO OUTPUT socket
Recording monitor Recording monitor appears when adjusting the recording level.
< Recording from a headphone socket >
Commercially available connection cable TV
<Connecting with a digital cable >
The recording monitor displays D. L. +10dB.
To the headphone socket
The above are analogue connections. Adjust the recording level manually.
If recording from a CD, set to "D. L. +8dB" if it is a CS tuner or other equipment.
< Connecting with an analogue cable >
Recording from an optical digital socket
High quality sound can be ensured. [. . . ] Enjoy the high quality sound of the "Mobile 1-bit digital amplifier". L+ R+ L- R4-pole plug for mobile 1-bit digital amplifier
Listening to music through another system < With an audio input socket >
Supplied connection cable White : to the left Supplied output conversion cable (4-pole to 3-pole plug conversion) Red : to the right To the LINE INPUT socket Stereo system
Conventional 3-pole plug L R GND [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP IMDR420
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP IMDR420 will begin.