User manual SHARP LC-15SH1E

[. . . ] DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue : Neutral Brown : Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows; · The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. [. . . ] When you turn on the LCD TV set for the first time, the First Installation routine, which makes installation easier, is activated. Using this routine, you can select the on-screen display language, and automatically search for and store all the receivable channels. the "Location of TV set" screen appears in the language selected. Note: I You can change the on-screen display language after the First Installation routine by selecting "Language" on the TV menu (see pages 18 and 19). Pl ease en t er t he TV s et l o cat i on f o r t he c o r r e c t T V s t a n d a r d a n d t h e a p p r o p r i a t e p r o g r amme c l ass i f i cat i on f o r t he count r y: Ot her . When the search is completed, the number of the programmes found is displayed. A green indicator lights when the power is on and a red indicator lights when in the standby mode (the indicator will not light when the main power is off). Fundamentally, this operation manual provides a description based on operation using the remote control. END, Status Display Turns on the status display when the menu is not displayed. The Power/Standby indicator instantaneously changes from red to green and the main unit is turned on. Note: I The display time of the on-screen indicators can be selected with "Onscreen time" for the "On-screen display" menu item in the TV menu (see page 36). Notes: I If the current clock time is within the time limit, the Child Lock is activated immediately after the LCD TV set is turned off and on again. For example, if the current clock time is 9:00 and the time limit is specified from 22:00 to 14:00, the lock is effective from 9:00 to 14:00. I When a Child Lock is set for all programmes with a time limit, the "Time and date" item is not displayed in the TV menu and cannot be selected. Description Select "yes" to activate the Child Lock immediately (after the LCD TV set has been turned off and on again). Warning: I The timer takes its clock information from the Teletext broadcast. The teletext broadcast may be different time zone and therefore child lock timer may not activate as expected. Only, " and then press OK to display the "For individual progr. Note: I When a Child Lock is activated, the "Programmes" item is not displayed in the TV menu and cannot be selected. [4] Temporarily cancelling the Child Lock setting You can view a programme for which a Child Lock has been set by temporarily cancelling the Child Lock setting. Perform the procedure below to input your PIN and cancel the Child Lock if you are prompted to do so. | When the PIN input screen appears, input your PIN with Channel Select. [. . . ] The "9" key on the remote control can be used to zoom the current teletext page as below. During normal viewing the CYAN button can be used to quickly activate or disactivate subtitles. It is possible to enjoy video and sound by connecting a VCR and home video game system to the terminals located on the rear of the main unit. When connecting an external device, turn off the power of the main unit and connecting device to prevent any possible damage. [. . . ]