User manual SHARP LC-32DH500E/S

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP LC-32DH500E/S. We hope that this SHARP LC-32DH500E/S user guide will be useful to you.


SHARP LC-32DH500E/S : Download the complete user guide (4608 Ko)

Manual abstract: user guide SHARP LC-32DH500E/S

Detailed instructions for use are in the User's Guide.

[. . . ] Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: · The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. · The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug. [. . . ] Enter the same 4-digit number as in step 4 to confirm. · "The system PIN has been changed successfully" displays. NOTE · To view a locked channel, you must enter a PIN. (See this page and page 27 for locking channels from viewing in analogue TV and DTV mode. ) When you select a locked channel, a PIN prompt message pops up. Press OK to display the PIN input window. Resetting the PIN Sort Channel positions can be sorted freely. Press a/b/c/d to select the channel you want to move, and then press OK. Repeat steps 3 and 4 until all desired channels are sorted. 1 2 3 4 5 1 2 3 4 Repeat steps 1 to 3 in Changing the PIN. Press c/d to select "Yes", and then press OK. NOTE · As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach. · See page 32 for resetting the current PIN to the factory preset "1234" if you lose or forget your PIN. Erase Programme An individual programme can be erased. Input Label You can assign each input source a label you like. 1 2 3 4 5 Repeat steps 1 to 4 in Programme Setup. Press a/b/c/d to select the channel you want to erase, and then press OK. · A message screen pops up. 1 2 3 4 5 6 Press b to select the desired input source. Press a/b/c/d to select each character of the new name for the input source, and then press OK. Repeat step 5 above until the name is fully spelt out, and then press OK. · The name can be 6 characters or less. · If a label name is less than 6 characters, select "END", then press OK. Press c/d to select "Yes", and then press OK to erase the selected programme. · "NTSC3. 58", "NTSC4. 43" and "PAL-60" cannot be selected in TV tuner mode. 5 6 Press a/b to select the desired item, and then press OK. Press a/b/c/d to select the desired setting, and then press OK. Selectable items RGB/YCbCr 4:4:4/ YCbCr 4:2:2 ITU601/ITU709 Description Select the video signal type from the HDMI terminal. Select the internal colour space conversion method when an RGB signal is input. Set whether or not to use WIDE MODE based on signal recognition, including an HDMI signal. Select "Analogue" for audio signal via the AUDIO jack. HDMI Setup items Signal Type* Colour Matrix* Demo Menu Operation: C (page 12) TV/AV only When activated, this function demonstrates some of the functions of the TV on the screen. Input Source: Selects whether to demonstrate all functions of connected terminals or skip some. Interval: Sets the interval between the presentations. Dynamic Range* Normal/ Enhanced Auto View Disable/Enable Audio Select** Digital/Analogue NOTE · Some demonstrations may not be presented depending on the settings made above. · After switching on this demo function, it takes 70 seconds approximately, before the TV-set starts the demo show. Return to normal television-mode is possible only by deactivating the demo-function. NOTE · Refer to your external equipment operation manual for the signal type. · Items marked * may be greyed out (with 4) depending on the type of signal input from the external equipment. · Item marked ** is only available when EXT5 is selected. 19 Useful features WIDE MODE TV/AV only WIDE MODE You can select the picture size. PC only You can select the picture size. [. . . ] The TV's communications settings are as follows: Baud rate: Data length: Parity bit: Stop bit: Flow control: 9, 600 bps 8 bits None 1 bit None 33 Appendix Commands CONTROL ITEM POWER SETTING INPUT SELECTION A COMMAND PARAMETER POWR 0 I I I I I CHANNEL TGD_ TVD_ DTV_ AVD* AVD?CONTROL CONTENTS POWER OFF INPUT SWITCHING (Toggle) TV (CHANNEL FIXED) DTV (CHANNEL FIXED) EXT1 ­ 6 (1 ­ 6) 1 to 6, ERR (TV/DTV) TV DIRECT CHANNEL (1 ­ 99) 1 to 99 CHANNEL UP CHANNEL DOWN DTV DIRECT CHANNEL (1 to 999) 1 to 999 DTV CHANNEL UP DTV CHANNEL DOWN EXT1 (Y/C) EXT1 (CVBS) EXT1 (RGB) 0 to 2 EXT2 (Y/C) EXT2 (CVBS) EXT2 (RGB) 0 to 2 EXT3 EXT4 (RGB) EXT4 (COMPONENT) 0 to 1 EXT5 (HDMI) EXT6 (HDMI) AV MODE SELECTION (Toggle) STANDARD SOFT ECO USER DYNAMIC 1 to 5 VOLUME (0 ­ 60) 0 to 60 TEXT AUDIO CHANGE SLEEP TIMER SURROUND MUTE WIDE MODE CONTROL ITEM POSITION COMMAND PARAMETER HPOS VPOS CLCK PHSE WI WI WI WI WI WI WI WI WI WI * * * * * ?CONTROL CONTENTS H-POSITION AV ( AV ( AV ( 10 ­ 20 ­ 10) 20 ­ 20) 20) V-POSITION AV ( CLOCK (0 ­ 180) 0 to 180 PHASE (0 ­ 40) 0 to 40 WIDE MODE (Toggle) NORMAL (AV) ZOOM 14:9 (AV) PANORAMA (AV) FULL (AV) CINEMA 16:9 (AV) CINEMA 14:9 (AV) NORMAL (PC) FULL (PC) 1 to 10 MUTE (Toggle) MUTE ON MUTE OFF 1 to 2 SURROUND (Toggle) SURROUND ON SURROUND OFF 1 to 2 SOUND SELECT (ST/Bilingual/mono) OFF 30 m 1 h 00 m 1 h 30 m 2 h 00 m 2 h 30 m 0 to 150 TEXT OFF TEXT CHANGE (Toggle) 0 to 1 DIRECT PAGE JUMP (100 ­ 899) 100 to 899 10 ­ 10) HPOS?DTUP_ DTDW_ INPUT SELECTION B I I I I I I I I I I I I I I NP10 NP11 NP12 NP1 ? [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP LC-32DH500E/S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP LC-32DH500E/S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.