User manual SHARP LC-46HD1E

[. . . ] To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug. Before replacing the plug cover make sure that: If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug. [. . . ] Make sure the module is not bent in the process. 19 AQUOS LINK Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. NOTE AQUOS LINK-compatible AQUOS AUDIO speaker system and AQUOS Recorder are scheduled to be on sale after the release of this TV (as of September 2008). What you can do with AQUOS LINK One Touch Recording (DTV only) You do not have to search for the remote control unit of your recording device. Press the REC E or REC STOP H buttons inside the flip cover to start/stop recording what you see on the recorder. One Touch Play When the TV is in standby mode, it will automatically turn on and play back the image from the HDMI source. Single remote control operation AQUOS LINK automatically recognises the connected HDMI devices and you can control the TV and the devices as if using a universal remote control unit. Operating Title list of external devices In addition to displaying the TV's own Timer list (Page 12), you can also call up the external player's Top menu or AQUOS BD Player's/AQUOS Recorder's Title list provided that the devices support AQUOS LINK. Multiple control of HDMI devices You can select which HDMI device to operate using the OPTION button. NOTE When you use AQUOS LINK, make sure to use a certified HDMI cable. Point the remote control unit toward the TV, not to the connected HDMI device. Up to three HDMI recording devices, one AV amplifier and two players can be connected using this system. These operations affect the HDMI device selected as the current external source. If the device does not operate, turn on the device and select the appropriate external source using b. When you insert/remove HDMI cables or change connections, turn on all connected HDMI devices before turning on the TV. Confirm that picture and audio are correctly output by selecting "HDMI1", "HDMI2" or "HDMI3" from the "INPUT SOURCE" menu. AQUOS LINK connection First connect the AQUOS AUDIO speaker system or an AQUOS BD Player/AQUOS Recorder that supports the HDMI CEC protocol. NOTE Refer to the operation manual of the device to be connected for further details. The media type changes every time you press OK. 2 Press a/b to select "By AQUOS AUDIO SP", and then press OK. The sound from the TV speaker and headphone terminal is silenced and only the sound from the AQUOS AUDIO speaker system is audible. Listening with the AQUOS TV speaker system You can choose to listen to the TV sound only from the AQUOS TV speaker system. 1 Open the remote control unit's flip cover, and then press OPTION. 2 Press a/b to select "By AQUOS SP", and then press OK. HDMI device selection If multiple HDMI devices are connected in a daisy chain, you can specify which device to control here. 1 Open the remote control unit's flip cover, and then press OPTION. The HDMI device changes every time you press OK. Manually changing the AQUOS AUDIO speaker system's sound mode 1 2 3 Open the remote control unit's flip cover, and then press OPTION. The sound mode changes every time you press OK. Refer to the operation manual of the AQUOS AUDIO speaker system for details. Recording via the AQUOS Recorder EPG (only for recorders) You can call up the CEC-compatible recorder's EPG and preset timer recordings using the TV's remote control unit. 1 Open the remote control unit's flip cover, and then press OPTION. 2 Press a/b to select "Recorder EPG", and then press OK. The external input source switches and the recorder's EPG is displayed. Calling up the menu of an external device connected with the TV via HDMI You can call up the menu of an HDMI CEC-compatible external device (player, recorder, decoder, etc. ) using the "Setup Menu" function. 22 3 Select the programme to record. Refer to the operation manual of the recorder for details. Menu operation What is the MENU? You need to call up the OSD to perform settings for the TV. The "MENU" can be operated with the remote control unit. Common operations 1 Display the MENU Screen Press MENU and the "MENU" screen displays. Picture 2 Select an item Press a/b/c/d to select/adjust the desired menu, and adjust the item to the desired level, and then press OK. DYNAMIC OPC Backlight Contrast Brightness Colour Tint Sharpness Advanced Reset [+14] [+30] [0] [0] [0] [0] 16 0 30 30 30 10 [Off] +16 +40 +30 +30 +30 +10 Press 6 to return to the previous "MENU" page. E Selecting in the MENU ECO Energy Save No Signal Off No Operation Off Sleep Timer [Off] [Disable] [Disable] 3 Exit the MENU screen The operation will exit the "MENU" screen if you press END before it is completed. E Selecting options Digital Search Analogue Search NOTE "MENU" options differ in the selected input modes, but the operating procedures are the same. The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens. [. . . ] (Common Interface) OUTPUT Headphones OSD language UHF/VHF 75 q Din type (Analogue & Digital) D-Sub 9 pin male connector SCART (AV input, Y/C input, RGB input, TV output) SCART (AV input/monitor output, Y/C input, AV Link, RGB input) COMPONENT IN: Y/PB(CB)/PR(CR), RCA pin (AUDIO R/L) 15 pin mini D-sub, 3. 5 mm jack* HDMI HDMI, 3. 5 mm jack* HDMI RCA pin (AV input) USB 2. 0 Optical S/PDIF Digital audio output EN50221, R206001 RCA pin (AUDIO R/L) 3. 5 mm jack (Audio output) Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Italian, Latvian, Lithuanian, Norwegian, Polish, Portuguese, Russian, Slovak, Slovene, Spanish, Swedish, Turkish, Ukrainian AC 220240 V, 50 Hz LC-46D65E LC-46DH65E LC-46DH65S 0 C to e40 C 217 W (0. 5 W Standby) LC-52D65E 220 W (0. 5 W Standby) LC-52DH65E LC-52DH65S 266 W (0. 5 W Standby) 269 W (0. 5 W Standby) Power Requirement Power Consumption (Method IEC62087) Weight Operating temperature 21. 2 kg (Without stand), 24. 2 kg (With stand) 24. 7 kg (Without stand), 28. 3 kg (With stand) * The HDMI2 and EXT4 terminals can both use the same audio input terminal. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. NOTE Refer to the inside back cover for dimensional drawings. Optional accessory The listed optional accessories are available for this LCD colour TV. [. . . ]