User manual SHARP LC40FG3242E
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP LC40FG3242E. We hope that this SHARP LC40FG3242E user guide will be useful to you.
Manual abstract: user guide SHARP LC40FG3242E
Detailed instructions for use are in the User's Guide.
[. . . ] The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. [. . . ] About the guide display
The guide display at the bottom of the screen shows operations with the OSD. Indd 22
2009/10/09 14:13:05
Basic adjustment
Picture settings
Picture
Picture
Advanced
[Off]
DYNAMIC
OPC Backlight Contrast Brightness Colour Tint Sharpness Advanced Reset
This TV provides various advanced functions for optimising the picture quality. 100 Hz Film mode Active contrast Gamma adjustment DNR 3D-Y/C Monochrome Range of OPC R Y G C B M
Picture
OPC
Automatically adjusts the brightness of the screen. Item Off On On:Display The brightness is fixed at the value set in “Backlight”. Displays the OPC effect on the screen while adjusting the brightness of the screen. -hue
This function adjusts the hue of a selected colour using a six-colour adjustment system. -saturation
This function increases or decreases the saturation of a selected colour using a six-colour adjustment system. NOTE
• When set to “On”, the TV senses the surrounding light and automatically adjusts the backlight brightness. Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light. -value
This function adjusts the brightness of a selected colour using a six-colour adjustment system. Item High Mid-High c (Cursor) d (Cursor) Middle The screen brightens For more contrast For more brightness For more colour intensity Skin tones become greenish For more sharpness Mid-Low Low R/G/B Gain (LO), R/G/B Gain (HI) White with bluish tone. Picture adjustments
Adjusts the picture to your preference with the following picture settings. Adjustment items
Selectable items Backlight Contrast Brightness Colour Tint Sharpness
The screen dims For less contrast For less brightness For less colour intensity Skin tones become purplish For less sharpness
23
LC-LE705E_GB. Indd 23
2009/10/09 14:13:07
Basic adjustment
100 Hz
“100 Hz” technology provides superior solutions for digital display picture quality removing motion blur. Range of OPC
The brightness level range of the OPC sensor’s automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of e 16 and a minimum of f 16. NOTE
• This function is available only when the “OPC” setting is set to “On” or “On:Display”. The maximum setting cannot be set to a smaller number than the minimum setting. The minimum setting cannot be set to a bigger number than the maximum setting. Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small. Film mode
Automatically detects a film-based source (originally encoded at 24 or 25 frames per second, depending on the vertical frequency), analyses it and then recreates each still film frame for high-definition picture quality (“Advanced (High)”, “Advanced (Low)”, “Standard”, “Off”). You can also switch the mode on the “Picture” and “Audio” menu screen by pressing #. [. . . ] The source code for the software components whose copyrights are held by SHARP is not distributed. Acknowledgements The following open source software components are included in this product: • linux kernel • busy box • uClibc • zlib • libpng • libjpeg • mtd-utils
43
LC-LE705E_GB. 2 kg (with stand)
VHF/UHF CATV
Headphones OSD language
Power requirement Power consumption (method IEC62087) Weight Operating temperature
I J
The HDMI 2 and EXT 4 terminals can both use the same audio input terminal. Standby power consumption applies when the TV is set to not receive EPG data. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP LC40FG3242E
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP LC40FG3242E will begin.