User manual SHARP MD-MS701

[. . . ] . 10 Advanced Features Preparation Inserting a MiniDisc . . Back cover 3 01/10/26 MD-MS701_1. fm -Contents- Titling a MiniDisc . 28 MD-MS701 Special Notes Warnings The supplied AC adaptor contains no user serviceable parts. It contains dangerous voltages, always remove the mains plug from the main outlet socket before any service operation or when not in use for a long period. [. . . ] To cancel the operation, press the :OFF/HOLD button. Begin playback on the stereo system. Recording will begin automatically. To interrupt recording When the stereo system is stopped, the unit will enter the synchro recording pause mode. If a silence lasts for 3 seconds or more, the recording will be paused (pause function does not work for approximately 10 seconds after a recording starts). A new track number is created when the recording resumes. 22 01/10/26 MD-MS701_4. fm MD-MS701 To start recording from the middle of a track 1 2 You can erase a portion of a track and make a new recording. All of the tracks that follow the newly recorded track will be erased. During playback, press the button at the point where you want to begin recording. Press the REC button. All of the tracks and track names will be erased, following the point where the playback is paused. 4 5 6 7 Press the MENU/CHRG button repeatedly to select "REC MODE". Press the MENU/CHRG button repeatedly to select the recording mode (step 3, page 20). Press the button. Recording will start. Note: To keep a track after the point you want to make a new recording, move the track and then make recording after that point. (See "Editing a Recorded MiniDisc", page 34. ) 23 01/10/26 MD-MS701_4. fm -Advanced Recording- 3 Press the ENTER/SYNC button. Useful Features To cancel the operation, press the :OFF/HOLD button. MD-MS701 Advanced Recording (continued) To create your own track numbers Recording tracks as a single track You can create your own track numbers at any point. Whilst recording, press the REC button at the point where you want to create track numbers. One track number will be added every time the REC button is pressed. You can record several pieces of music as a single track by disabling the auto marker function. When a recording is paused or whilst recording. . . 1 2 3 Useful Features -Advanced Recording- Numbering restriction If you try to number more than 10 tracks in certain amount of time, "SORRY" will be displayed and the operation will be disabled. "SET UP" will appear. When you release the button, "BEEP" will appear. You can eliminate the confirmation sound that beeps when you press a button. pUseful Features 3 4 5 Press the MENU/CHRG button to display the menu. Press the ENTER/SYNC button. You can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc. Auto power save When the unit is used in a place exposed to much vibration, sound skipping can be decreased by cancelling the auto power save function. (Battery will drain faster. ) MENU BEEP (Confirmation sound) SETTING ITEM BEEP ON* BEEP OFF Beep Silent Set. Cancelled. What is auto power save function? During playback, maximum 40 seconds (in stereo) of musical information is stored. Auto power save function automatically adjusts the storage time between 5 and 40 seconds to reduce the power consumption. If this unit is used with the AC adaptor, the storage time will be 40 seconds regardless of the settings. The storage time varies depending on the recording mode. AUTO PLAY (Auto play) A-PLAY ON* A-PLAY OFF POWER SAVE (Auto power save) D-LEVEL (Digital recording level) AUTO Psave* Psave OFF D. L MODE 1* D. L MODE 2 Digital recording level (*) indicates default setting. "D. L MODE 1" The digital recording level you set will be kept even after cancelling recording. "D. L MODE 2" Every time you cancel recording, the level will return to [D. L 0dB]. 28 01/10/26 MD-MS701_5. fm Titling a MiniDisc 1 2 3 Creating disc and track names Load a MiniDisc to be named. <Disc name> <Track name> Whilst in the stop Whilst in the pause mode, press the mode, press the MENU/CHRG button to MENU/CHRG button to select "EDIT". select "EDIT". MD-MS701 (Capital letters) (Lower-case letters) (Numbers and symbols) The first 3 characters in the group of the selected characters will be displayed for about 1 second. Press the ENTER/SYNC button. <Disc name> Press the MENU/CHRG button to select "DISC NAME". <Track name> Press the MENU/CHRG button to select "TRACK NAME". 6 Press the or lect the letter. button repeatedly to se- Advanced Features 7 Press the ENTER/SYNC button to enter it. 4 Press the ENTER/SYNC button. Position where the next letter will be entered Cursor The unit will enter the character input mode. [. . . ] Plug the AC adaptor back into the wall socket and reoperate the unit. When the unit becomes dirty Clean it with a soft cloth. When the unit is excessively dirty, use a soft cloth dampened in water (external surfaces only). Moisture condensation Caution: Do not use chemicals for cleaning (petrol, paint thinner, etc. ). It may cause malfunctions. When the unit has condensation inside, the disc signals cannot be read, and the unit may not function properly. When the unit is placed in a room where there is excessive steam or moisture. [. . . ]