User manual SHARP MD-MS702

[. . . ] PORTABLE MINIDISC RECORDER MODEL MD-MS702 OPERATION MANUAL MD-MS702 MD-R2 INTRODUCTION Thank you for purchasing this SHARP product. It will guide you in operating your SHARP product. CONTENTS Page ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 NAMES OF CONTROLS AND INDICATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11 RECORDING USING AN OPTIONALLY AVAILABLE DIGITAL CABLE . . . . . . . . . . [. . . ] When the sound is distorted: q If the volume is too high while the bass is being emphasized, the sound may be distorted, depending on the music on the track. If this happens, decrease the bass level or lower the volume level. 22 MD-MS702 CONVENIENT PLAYBACK FUNCTIONS s Cue and review 1 Load a MiniDisc and begin playback. 2 Press and hold down the 4 button for audible fast forward, or press and hold down the 5 button for audible fast reverse. 3 Normal playback will resume when the 5 or 4 button is released. s APSS (Auto Program Search System) APSS automatically locates the beginning of any track. To move to the beginning of the next track: Press the 4 button during playback. 5 4 To re-start the track being played: Press the To skip a number of tracks at one time, press the or button repeatedly until the desired track number is shown. To begin playback at a desired track, press the or button while in the stop mode to select the track number. Note: q When the first track is selected and the button is pressed, the last track on the disc will be located. When the last track is selected and the button is pressed, the first track will be located. Notes: q When the end of the last track is reached during fast forward, the unit will enter the pause mode. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. q When the unit is in the all track repeat mode, the search will wrap around from the last track to the first, or vice versa. q Depending on the contents recorded on a MiniDisc, some sounds may be skipped while cueing and reviewing. To search very quickly: When fast forward or fast reverse is used while in the pause mode, the search will be performed more quickly than during audible fast forward or fast reverse playback. q When you lift your finger, the unit will re-enter the pause mode. 54 06 5 4 23 MD-MS702 PLAY MODE MODE/INS s To play at double speed (Mono recording only) Press the ENTER/F. PLAY/SYNCHRO button while a MiniDisc recorded in the monaural long-play mode is being played. q The unit will display "FAST PLAY" and start fast playback. s Random play or repeat play During playback or while in the stop mode, press the MODE/INS button repeatedly to select the playback mode. RANDOM Random play Repeat play of all of the tracks 1 No display Repeat play of a single track Normal playback q When the ENTER/F. PLAY/SYNCHRO button is pressed again, the unit will return to normal play. Notes: q Depending on the contents recorded on a MiniDisc, it may be difficult to hear them. q If a track recorded in the stereo mode is reached during fast playback, the fast playback mode will be canceled. PLAY/SYNCHRO button. q If the playback mode is selected while stopped, press the button to start playback. 06 To interrupt fast playback: Press the button during playback. q When the button is pressed again, the unit will resume fast playback. 06 06 Notes: q When "TOC" is displayed, repeat play is impossible. (You cannot select the order of the tracks. ) After all of the tracks have been played once each in random order, the unit will stop automatically. q During random play or repeat play of a single track, cue and review of the previous or next tracks is not possible. q During random play, the unit cannot find the beginning of any track which has been played. 24 MD-MS702 DISPLAY DISPLAY s To check the elapsed time and remaining time of the track During playback, press the DISPLAY button. q Each time the button is pressed, the display will change as follows: Track number s To check the remaining recording time and the total playing time While in the stop mode, press the DISPLAY button. [. . . ] Input sensitivity: Recording level MIC H MIC L LINE Output level: Reference input level Input impedance 0. 25 mV 2. 5 mV 100 mV 10 k ohms 10 k ohms 20 k ohms Specified output Headphones LINE -- 300 mV (-12dB) Maximum output level 10 mW + 10 mW -- Load impedance 32 ohms 50 k ohms Dimensions: Weight: Input jack: Output jack: Width: 3-7/16" (87. 0 mm) Height: 1-3/16" (29. 4 mm) Depth: 3-7/32" (81. 5 mm) 0. 49 lbs. (219 g) with rechargeable battery Line/optical digital, microphone (powered by the main unit) Headphones (impedance: 19 ohms)/ remote control unit s MiniDisc Recorder Type: Signal readout: Audio channels: Frequency response: Rotation speed: Error correction: Coding: Recording method: Sampling frequency: Wow and flutter: Portable MiniDisc recorder Non-contact, 3-beam semi-conductor laser pick-up Stereo 2 channels/monaural (long-play mode) 1 channel 20 ­ 20, 000 Hz (± 3 dB) Approx. 400 ­ 900 rpm ACIRC (Advanced Cross Interleave Reed-Solomon Code) ATRAC (Adaptive TRansformed Acoustic Coding), 24-bit computed type Magnetic modulation overwrite method 44. 1 kHz (32 kHz and 48 kHz signals are converted to 44. 1 kHz, and then recorded. ) Unmeasurable (less than ±0. 001% W. peak) 41 MD-MS702 MEMO LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. [. . . ]