User manual SHARP MD-X8

[. . . ] MD/CD STEREO MODEL MD-X8 OPERATION MANUAL Thank you for purchasing this SHARP product. MD-X8 MD/CD stereo consisting of MD-X8 MD/CD stereo CP-X8 2 way speaker system. CONTENTS Page IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SPECIAL NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] After all of the tracks are recorded, the unit will stop automatically. To record from a track in the middle of an MD to the last track on the disc: Select the track number to start recording from, after performing step 4. Then press the MD 0 MD button on the main unit. M DWWWM DW E D I T WWWWWWWWW B E S T WH I T S WWWWWWWWWWWW E D I T W T O T A L WWWWWWWWWWW WW 1 2 W T R A C KWW 3 3 : 1 1 WWWW To record a particular track: 1 Select the track number to record from after performing step 4. Total number of recordable tracks Total time I If you start recording from a track in the middle, or if you only record a few tracks, the disc name cannot be recorded. (When not all of the tracks can be recorded) M DWWWM DW E D I T WWWWWW B E S T WH I T S WWWWWWWWW T O T A L T T I M E WWWWWWWW WW 1 6 W T R A C KWW 4 7 : 0 0 W ED I T OVER 13: 49 2 3 Press the TRACK button on the main unit. Press the MD 0 MD button on the main unit. Time that cannot be recorded Notes: Before using the MD 0 MD button, the following precautions should be noted. I By using the MD 0 MD EDIT function, the analog recording mode will be used. I If the MiniDisc to be recorded on already has a disc name, the disc name cannot be recorded over. If you want to record a new disc name , you must erase the existing disc name before entering a new disc name. (Page 37) I When a playback-only MiniDisc is played, "Can't COPY NAME" will be displayed, and the sound will be recorded but the disc name and the track names will not be recorded. I If a track is very short, it may be impossible to record all of the track name . I Both the disc name and each of the track names, you contain up to 100 characters (including spaces). I The volume, equalizer, and signal level will be adjusted automatically. The recording may be stopped if the batteries run down while recording. I If you only want to record a particular track, or if you start recording from a track in the middle of the disc, the recordable time will not be displayed. If the recordable time on the target MiniDisc is insufficient, the recording will stop in the middle of a track. I The shorter the track names are, the shorter the period of time that "NAME READING" will flash. I If the MiniDisc has a scratch or is dirty , the disc name and the track names may not be recorded. In such a case, restart the recording again, or add the disc and track names using the DISC NAME function and the TRACK NAME function, after you are through recording. (Page 36) 30 *27-37 30 98. 6. 23, 10:32 AM EDITING We will explain the 5 editing functions you can use to create your own recorded MiniDiscs. Divide 1 2 3 A 1 2 B 3 C D 4 A B C D A track can be divided into two tracks. If two selections were recorded as a single track because there was not enough silent space between the tracks, you can use the DIVIDE function to separate the selections. This feature is also convenient for identifying specific points with one selection so that you can locate those points easily whenever you like. (Page 33) 1 2 3 4 Combine Two adjacent tracks (for example, the third and fourth tracks) can be combined. If there is a prolonged silence in the middle of a selection that is recorded, a single piece of music may be recorded as two tracks. If this happens, these two tracks can be combined into a single track. [. . . ] There may be some deviations from these values in individual units. H Main unit section (MiniDisc recorder section) Type: Signal readout: Audio channels: Frequency response: Rotational speed: Quantization: Filter: Error correction: Coding: Recording method: D/A converter: Sampling frequency: Wow and flutter: Signal/noise ratio: Dynamic range: MiniDisc recorder Non-contact, 3-beam semi-conductor laser pick-up Stereo 2 channels/monaural (long-play mode) 1 channel 20 - 20, 000 Hz (+1/-3 dB) 400 - 900 rpm CLV, Approx. 16-bit linear 8-times oversampling digital filter ACIRC (Advanced Cross Interleave Reed-Solomon Code) ATRAC (Adaptive TRansform Acoustic Coding) Magnetic modulation overwrite method 1-bit 44. 1 kHz Unmeasurable (less than 0. 001% W. peak) 95 dB (1 kHz) 90 dB (1 kHz) (General) Power source: Power consumption: Output power: Input terminals: AC 120 V, 60 Hz 135 W 40 watts minimum RMS per channel into 6 ohms from 60 Hz to 20 kHz, 10 % total harmonic distortion AUX 1 (Analog); 500 mV/47 kohms AUX 2 (Analog); 500 mV/47 kohms AUX DIGITAL 1 (Optical) AUX DIGITAL 2 (Coaxial) PHONO; 3 mV/47 kohms Headphones; 16- 50 ohms (recommended; 32 ohms) Speakers; 6 ohms AUX (Analog); 2. 0 V (1 kohm) Width; 9-1/2" (240 mm) Height; 11-7/16"(290 mm) Depth; 12-1/2" (317 mm) 18. 1lbs. (8. 2 kg) Output terminals: Dimensions: Weight: (Compact disc player) Type: Signal readout: Rotational speed: Error correction: Quantization: D/A converter: Filter: Frequency response: Signal/noise ratio: Dynamic range: Wow and flutter: 3 disc multi-play compact disc player Non-contact, 3-beam semi-conductor laser pickup 200 - 500 rpm CLV, Approx. [. . . ]