User manual SHARP MD-E9000

[. . . ] MD COMPACT COMPONENT SYSTEM MODEL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. MD-E9000H MD Compact Component System consisting of MD-E9000H (main unit) and CP-E9000H (speaker system). MD-E9000H OPERATION MANUAL If you require any advice or assistance regarding your Sharp product, please visit our website www. sharp. co. uk/support. Customers without internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). *MD9000H(FRONT/BACK) 2 2001. 4. 20, 2:01 AM Special Notes NOTES FOR USERS IN THE U. K. [. . . ] NONE TP TA Broadcast when testing emergency broadcast equipment or receivers. Emergency announcement made under exceptional circumstances to give warning of events causing danger of general nature. Traffic announcements are being broadcast. 10 LIGHT M 11 CLASSICS OTHER M 12 WEATHER FINANCE CHILDREN Note: When you select a programme in the EON stand-by mode, the unit will display "TI" instead of "TA". Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) 25 *MD9000H-E24-30 25 2001. 4. 20, 2:11 AM Using the Radio Data System (RDS) (continued) s Using the Auto Station Programme Memory To stop the ASPM operation before it is complete: Press the ASPM button whilst it is scanning for stations. Notes: q If the same station is broadcasting on different frequencies, the strongest frequency will be stored in memory. q Any station which has the same frequency as the one stored in memory will not be stored. q If 40 stations have already been stored in memory, the scan will be aborted. q If no stations have been stored in memory, "END" will appear for about 4 seconds. q If the RDS signals are very weak, station names may not be stored in memory. (ASPM) Whilst in the ASPM operation mode, the tuner will automatically search for new RDS stations. If you have already stored some stations in memory, the number of new stations you can store will be less. - Using the Radio Data System (RDS) - 1 2 Press the TUNER (BAND) button repeatedly to select "FM". Press and hold down the ASPM button for at least 3 seconds. RDS Radio 1. After "ASPM" has flashed for about 4 seconds, scanning will start (87. 50 108. 00 MHz). To erase all of the contents of preset memory: Refer to "To clear all memorised stations" on page 23. To correct a station name in memory: 2. When an RDS station is found, "RDS" will appear first, and then the station will be stored in memory. It may be impossible to store station names in memory using the ASPM function if there is lots of noise or if the signal is too weak. If you find a wrong name while receiving the station, wait until the correct name will be displayed. Press the MEMORY/ENTER button whilst the preset channel number is flashing. (Within 5 seconds) q The new station name has been stored in memory correctly. q In a certain area or during certain time periods, the station names may temporarily be different. 3. After scanning, the number of stations stored in memory will be displayed for 4 seconds. 26 *MD9000H-E24-30 Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) 26 2001. 4. 20, 2:11 AM Using the Radio Data System (RDS) (continued) s To recall stations in memory To specify programmed types and select stations (PTY search): You can search a station by specifying the programme type (news, sports, traffic programme, etc. Notes: q If the display has stopped flashing, start again from step 2. If the unit finds out a desired programme type, corresponding channel number and frequency will flash for about 2 seconds, and then the station name will flash for 7 seconds and remain lit. q If you want to listen to the same programmed type of another station, press the PTY. q If no station can be found, "NOT FOUND" will appear for 4 seconds. MD-E9000H 1 2 1 2 Press the TUNER (BAND) button repeatedly to select "FM". [. . . ] After the "RESET" is displayed for about 1 second, the unit will enter the power stand-by mode. References s Cleaning the cabinet Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth. Caution: q Do not use chemicals for cleaning (petrol, paint thinner, etc. ). It may cause malfunctions. Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD or MiniDisc programme. s Before transporting the unit Remove the CD and the MiniDisc from the unit. Your unit checks whether there is a disc inside the unit when the compartment is closed. [. . . ]