User manual SHARP MD-X60H OPERATION MANUAL

[. . . ] YO <P=001> MD/CD COMPONENT SYSTEM OPERATION MANUAL MODEL MD-X60H Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. MD-X60H MD/CD component system consisting of MD-X60H MD/CD component system and CP-X60H speaker system. CONTENTS Page SPECIAL NOTES . 54 ACCESSORIES FM aerial × 1 AM loop aerial × 1 Remote control × 1 "AA" size battery (UM/SUM-3, R6, HP-7 or similar) × 2 Note: Parts and accessories mentioned in this operation manual other than those in the drawing are not included. MD-X60H(SUK) TINSE0227AWZZ YO <P=001> SPECIAL NOTES NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. [. . . ] Press the MD q REC button. 25 3 5 To record the track number whilst recording: The recording is performed as a single track. To identify different sections of a recording you can increase the track number at any point during the recording process. To create a new track number, whilst in the recording mode, press the MD q REC button. q The track number will increase by one, and then the recording will continue. q The unit will enter the recording stand-by mode. Note: q Before recording an AM broadcast, enter the recording stand-by mode, and then separate the AM loop aerial from the main unit. Adjust it so that the AM broadcast can be tuned in most clearly. 5 6 Check the recordable time by pressing the DISPLAY button. Press the MD 0 6 button. q During recording, you cannot change the station. To stop recording: Press the MD s button. After the track number has been written on the MiniDisc, the recording will stop. To interrupt recording: Press the MD Press the MD crease. 06 06 button whilst recording. The track number will in- s Recording from a cassette onto a MiniDisc (One-Touch Editing) The contents of a tape recording can be recorded onto an MD with a one-touch operation. s Recording from a cassette onto a MiniDisc (MD Synchronised Recording System) When a tape is played, the MD recording will start simultaneously. 1 2 3 4 5 6 7 Load a cassette for playback. Select the DOLBY NR mode. G 1 2 3 4 5 6 7 8 Load a cassette for playback. Press the TAPE button. q When recording with the Dolby NR system, turn on the G indicator. indicator. q When recording with the Dolby NR system, turn on the Check the recording mode by pressing the REC MODE button. Press the TAPE 0 MD button. q The unit will enter the recording stand-by mode. 0 q Recording will begin. To stop recording: Press the MD s or TAPE s button. q Recording will begin. To stop recording: What is the space-cut function? If there is a silence in the playback signal that lasts 3 seconds during a synchro recording, the recording will stop automatically and unit will enter the recording stand-by mode. Then, when sound from the playback unit resumes, recording will automatically restart. (A space of 3 seconds is placed between tracks. ) q If there is noise between tracks of the sound source, the synchro recording or the space-cut function may not work properly. q When you need to record tracks or audio that include very quiet passages lasting 3 seconds or more, manual recording is recommended. Press the TAPE s button after pressing the MD s button. To interrupt recording: Press the MD 0 6 button whilst recording. The track number will increase. Auto Mark function If there is 1 second or more of silence, a new track number is created automatically. 29 MD-X60H(SUK) TINSE0227AWZZ YO <P=001> (Continued) s Recording a track you want to add at the beginning of a MiniDisc (Pole Position Editing) MD DISPLAY When a track is added to an MD which already has recordings on it, and the POLE POSITION button is pressed, the track can be recorded at the beginning of the MD. 3 MD DISPLAY 2 To record from a CD onto a MiniDisc: 1 Prepare for recording. Press the CD 0 2 3 MD button. q Recording will begin. If recording does not start when the CD 0 MD button is pressed: If you cannot record all of the tracks you have selected from a CD, the number of tracks and the amount of time that can be included on the recording, and the number of tracks and the amount of time that cannot be included will both be displayed. The unit will then enter the recording stand-by mode. To record from a cassette tape: 1 2 q" Perform steps 1 to 6 on page 29 "One-Touch Editing". Press the TAPE 0 3 2 3 MD button. q Recording will begin. 2 3 To record from the built-in radio onto a MiniDisc: 1 3 4 2 2 q" Perform steps 1 to 5 on page 29 "Recording from the built-in radio onto a MiniDisc". Press the MD button. 3 4 q The unit will enter the recording stand-by mode. 06 q Recording will begin. 2 3 30 MD-X60H(SUK) TINSE0227AWZZ <P=002> (Continued) s Recording from a CD or an MD to a cassette tape (One-Touch Editing) CD CD MD MD CD TAPE MD TAPE TAPE TAPE A CD or an MD can be recorded, starting from the first track, with a one-touch operation. 1 2 3 4 Load a blank cassette into the cassette compartment. [. . . ] (Remove any source of shock or vibration whilst writing. ) q Replace it with another disc. q Replace the disc with another recordable disc. 53 MD-X60H(SUK) TINSE0227AWZZ <P=002> MAINTENANCE s Internal care q Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. q After long use, the deck's heads and capstans may become magnetised, causing poor sound. [. . . ]