User manual SHARP MD-X7H OPERATION MANUAL

[. . . ] 20 - 26 ENTERING CHARACTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 - 28 HOW TO USE THE BUILT-IN TIMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 - 32 USING EXTERNAL UNITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 MINIDISC SYSTEM LIMITATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Check the recordable time by pressing the DISPLAY button on the remote control. Press the MD 06 button. Note: I When recording from the AM band, put the unit in the recording standby mode. Then, before recording, separate the AM loop antenna from the main unit, and adjust the radio reception so that the AM station is tuned in clearly. H 3 5 4 To interrupt recording: Press the MD 06 button during recording. The track number increases. To record the track number during recording: Press the I REC button. To stop recording: Press the MD H button. After recording the track number, recording stops. 3 Number of tracks already recorded Notes: I The contents of a single recording are recorded under a single track number as a series of tracks. I If you use the monaural extended recording mode, you can make recordings that are about twice as long as stereo recordings. This is convenient for recording monaural broadcasts or talk programs. (Page 17) 4 Recordable time 19 *01-21 19 98. 6. 23, 10:09 AM EDITING We will explain the 5 editing functions you can use to create your own recorded MiniDiscs. Divide 1 2 3 A 1 2 B 3 C D 4 A B C D A track can be divided into two tracks. If two selections were recorded as a single track because there was not enough silent space between the tracks, you can use the DIVIDE function to separate the selections. This feature is also convenient for identifying specific points with one selection so that you can locate those points easily whenever you like. (Page 22) Combine 1 2 3 4 Two adjacent tracks (for example, the third and fourth tracks) can be combined. If the "TOC FULL" message is displayed, the second track may not be given a name. 1 2 3 4 H Combine 1 2 3, 4 2 1 While in the stop mode, select the second of the two tracks you wish to combine using the 5 or 4 button. I Start playing the second of the two tracks you wish to combine, and then press the MD 06 button. 2 3 4 Press the NAME/TOC EDIT button, and then select "COMBINE" using the v or w button. . Within 10 seconds, press the ENTER button. I The two tracks are combined, and the unit is stopped at the beginning of the combined track. I The numbers assigned to the tracks following the combined track are automatically decreased by one. 1 2 3 4 When both tracks have a name: I When only the first track has a name That name will be used. I When only the second of the two tracks has a name That name will be used. I When both tracks have a name The name of the first track will be used. To combine two noncontiguous tracks: (Example: the first and third tracks) Move the third track to the second track using the MOVE function. (Page 23) Then, combine the first and second tracks using the COMBINE function. Notes: I Tracks recorded from analog inputs cannot be combined with tracks recorded from CDs or MDs using the digital inputs. I Tracks recorded in the stereo mode cannot be combined with tracks recorded in the monaural long-play mode. I Tracks where either track's recording time is less than 15 seconds may not be combined. 22 *22-34 22 98. 6. 23, 10:10 AM (Continued) H Move 1 1, 4 2 3, 5 2 While in the stop mode, select the track you wish to move using the 5 or 4 button. I Start playing the track to be moved, and then press the MD 06 button. 2 3 4 Press the NAME/TOC EDIT button, and then select "MOVE" using the v or w button. Within 10 seconds, press the ENTER button. Select the direction to move the track using the 5 or 4 button. I The track is moved, and the unit is stopped at the beginning of the track. [. . . ] Remedy · Replace the disc with a recorded disc. *: Number or symbol 40 *35-40 40 98. 6. 23, 10:11 AM MAINTENANCE H Internal care I In order to ensure proper operation of the CD player, preventative maintenance (cleaning of the Laser Pick-up lens) should be performed periodically in order to keep the lens dust-free. Contact your local CD software dealer for options. H External care I Periodically wipe the cabinet with a soft cloth and dilute soap solution, then wipe with a dry cloth. I Do not use chemically treated cleaning cloths or other chemicals. SPECIFICATIONS As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. [. . . ]