User manual SHARP MOBILON HC-4500 OPERATION MANUAL

[. . . ] MODEL OPERATION MANUAL Safety Warning on Internal Fax/Modem Never install telephone wiring during a lightning storm. Never install a modular jack in a wet location unless the jack is specifically designed for wet locations. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Avoid using the modem over a telephone line during an electrical storm. [. . . ] When data is received on the ZR Series unit, data exceeding the 2048 byte limit is truncated. Since the name information on your unit is stored in several fields, they are mapped into one single field on the ZR Series unit as follows: Your unit Mr/Ms/Dr Suffix First Middle Last ZR Series unit Mr/Ms/Dr/[SP]First[SP]Middle[SP]Last[SP]Suffix Your unit uses more fields in storing address information than the ZR Series unit. Therefore the fields are mapped as follows: Your unit Street City State ZIP Country ZR Series unit Street[CR] City, [SP]State[SP]ZIP[CR] Country The Name field on the ZR Series unit is always required. If this field is empty, then the ZR Series unit will store it as Untitled. 49 Receiving data to your unit The following uses contacts as an example. Align your unit and the sending unit so that their infrared ports are facing each other. 2. In case of SHARP ZR Series unit, press SEND key, then start receiving the data. 50 Notes on field mapping when receiving data from ZR Series unit PC files are received as they are without any conversion. For Contacts data, the following rules apply: Contact1 data on the ZR Series unit is converted to Contacts data on the handheld PC. On the handheld PC, there are limits on the field sizes as follows: - Birthday and Anniversary are special fields for date input - All other fields can be up to 1, 023 bytes. On the ZR Series unit, the record size must be less than 2048 bytes but there is no limit on the field size. When data is received on the unit, data exceeding the field size limits is truncated. In the Unit to Unit dialog box on the ZR Series unit, turning on With Link Information will not send the linked data to the handheld PC. Since the name information on the handheld PC is stored in several fields, the name field on the ZR Series unit is split as follows: ZR Series unit Last Name, [SP]First Name Your unit Last Name First Name Last Name First Name First Name [SP]Last Name 51 The handheld PC uses more fields for storing address information than the ZR Series unit. Therefore the fields are mapped as follows: ZR Series unit Street[CR] City, [SP]State[LAST SP]ZIP[CR] Country Your unit Street City State ZIP Country 52 COMMON QUESTIONS & ANSWERS Q: A: Tell me more about the batteries. (HC-4000/HC-4100) You must install both the two main batteries (alkaline) as well as the lithium backup battery. The main batteries drive the unit while the backup battery serves as the backup in case the main batteries become depleted. You can also use the AC adaptor included in the optional Docking Station Kit for AC power (which will not work if the main batteries are depleted). Q: A: How long will the batteries last? Battery life varies from user to user. A number of factors will affect the battery life, including how much the unit is used. The battery life is rated at 24 hours of continuous display of the HC-4000/HC-4100. (or 6 hours for the HC-4500 with a fully charged battery pack. ) You can find out the battery level by using Power in the Control Panel. Also, if the icon appears on the task bar, you can find out the battery level by double-tapping the icon. Q: A: How can I use the internal fax/modem to fax from my unit? You can fax from virtually any standard analog phone line. The basic rule to follow is that if you can use a standard fax machine on the phone line, then it is analog and can be used with the unit. Use the supplied modular phone cable to connect your unit to the phone line. [. . . ] If any such defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as specified herein. This warranty shall not apply to: Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate use as outlined in the owner's manual. Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp's Authorized Service Centres or Sharp's Authorized Servicing Dealers. Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to software, paper and batteries. [. . . ]