User manual SHARP PN-R603

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP PN-R603. We hope that this SHARP PN-R603 user guide will be useful to you.


SHARP PN-R603 : Download the complete user guide (8645 Ko)

You may also download the following manuals related to this product:

   SHARP PN-R603 ANNEXE 1 (515 ko)
   SHARP PN-R603 ANNEXE 1 (515 ko)
   SHARP PN-R603 ANNEXE 1 (515 ko)

Manual abstract: user guide SHARP PN-R603

Detailed instructions for use are in the User's Guide.

[. . . ] PN-R603 LCD MONITOR OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No. : Serial No. : U. S. A. ONLY IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:  REDUCE THE RISK OF ELECTRIC TO SHOCK, DO NOT REMOVE COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within a triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] 480 LINES. . . . . . . . . . .  UTO, 640x480 or 848x480 A 768 LINES. . . . . . . . . . . AUTO, 1024x768, 1280x768, or 1360x768 1050 LINES. . . . . . . . . 1400x1050 or 1680x1050 ZOOM2 SPECIAL SETTING (See page 29. ) SCAN MODE (AV input) Sets the scan mode used for AV mode input. U * Even when MODE1 is selected, under-scan display is used when the input signal is 1080i/p and the screen size is Dot by Dot.  COLOR SYSTEM (D-SUB[VIDEO]) Select the color system of the AV equipment which is connected to PC/AV D-sub input terminal. (AUTO / PAL / PAL-60 / SECAM / NTSC3. 58 / NTSC4. 43) When AUTO is selected, the color system is automatically set according to the input signal. TIPS • When WHITE BALANCE is set to THRU, BLACK LEVEL, CONTRAST, TINT, COLORS, RGB INPUT RANGE, GAMMA and COPY TO USER cannot be set. • If COLOR MODE is set to sRGB, the following items cannot be set. WHITE BALANCE, PRESET, USER, COPY TO USER, and GAMMA • When the COLOR MODE is set to VIVID or HIGH ILLUMINANCE, GAMMA can not be adjusted. • STANDBY MODE cannot be set to LOW POWER when SCHEDULE is effective. • When displaying the color pattern, it is possible to adjust certain items of the PICTURE menu. Audio input from the HDMI input terminal is also not output. E 28 Menu Items nDual screen display nEnlarge • You can align several monitors and integrate them into a single large screen to display. • Up to 5 monitors can be aligned in both the horizontal and vertical directions. (Example) Horizontal direction: 2 monitors Vertical direction: 2 monitors You can display two screens simultaneously. PIP Main screen Sub screen A sub screen is displayed inside a main screen. PbyP Main screen Sub screen A main screen and a sub screen are displayed in a line. Horizontal direction: 3 monitors Vertical direction: 2 monitors PbyP2 Main screen Sub screen Displays a main screen which measures 1280 pixels in the longest direction and a sub screen in a line. * The currently selected input signal is displayed on the main screen. * The following combinations are available for display: DisplayPort - HDMI1 or HDMI2 DisplayPort - D-SUB[RGB] DisplayPort - D-SUB[COMPONENT] DisplayPort - D-SUB[VIDEO] DVI-I - HDMI1 or HDMI2 DVI-I - D-SUB[COMPONENT] DVI-I - D-SUB[VIDEO] TIPS • You might infringe on a copyright of the author which is protected by copyright law when you display the images of the computer screen and television/VCR simultaneously for profit-making or to show the image to the public. • The screen size for dual-screen display is the same as the screen size for single-screen display. The Dot by Dot screen is displayed in NORMAL size except when it is set as the PIP main screen. • When dual-screen display is selected, the SCREEN MOTION function is disabled. • When dual-screen display is selected, the AUTO INPUT CHANGE function is disabled. • When dual-screen display is selected, the screen cannot be enlarged. • When dual-screen display is selected, the INPUT SELECT options cannot be set. • When an interlaced signal (1080i, 480i, video) is input to the sub screen, horizontal lines may flicker. If this happens, display the image on the main screen. Setting procedure Set using MULTI in the MULTI/PIP menu. [. . . ] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Function TMDS data 2TMDS data 2+ TMDS data 2/4 shield N. C. DDC clock DDC data Analog Vsync signal TMDS data 1TMDS data 1+ TMDS data 1/3 shield N. C. 16 17 18 19 20 21 22 23 24 Function Hot-plug detection TMDS data 0TMDS data 0+ TMDS data 0/5 shield N. C. 1 2 3 4 5 6 7 8 9 10 Function TMDS data 2+ TMDS data 2 shield TMDS data 2TMDS data 1+ TMDS data 1 shield TMDS data 1TMDS data 0+ TMDS data 0 shield TMDS data 0TMDS clock+ No. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP PN-R603




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP PN-R603 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.