User manual SHARP PN-V600

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP PN-V600. We hope that this SHARP PN-V600 user guide will be useful to you.


SHARP PN-V600 : Download the complete user guide (9394 Ko)

You may also download the following manuals related to this product:

   SHARP PN-V600 ANNEXE 1 (4560 ko)
   SHARP PN-V600 ANNEXE 1 (4560 ko)
   SHARP PN-V600 ANNEXE 1 (4560 ko)
   SHARP PN-V600 ANNEXE 1 (4560 ko)
   SHARP PN-V600 SETUP GUIDE (4596 ko)
   SHARP PN-V600 INSTALLATION (4596 ko)
   SHARP PN-V600 INSTALLATION (4596 ko)
   SHARP PN-V600 INSTALLATION (4596 ko)
   SHARP PN-V600 INSTALLATION (4596 ko)
   SHARP PN-V600 ANNEXE 1 (4560 ko)
   SHARP PN-V600 INSTALLATION (4596 ko)

Manual abstract: user guide SHARP PN-V600

Detailed instructions for use are in the User's Guide.

[. . . ] PN-V600 LCD MONITOR OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No. : Serial No. : U. S. A. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW: Earth BLUE: Neutral BROWN: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: • The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth or coloured green or green-and-yellow. • The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. [. . . ] BRIGHTNESS SENSOR (When connected to the PN-ZR01 (optional) only) When set to ON or ON: DISPLAY, the brightness will automatically change according to the lighting and surrounding brightness. If connecting to multiple monitors, the brightness of all the monitors will change. When setting BRIGHT in SCHEDULE on the OPTION menu, set BRIGHTNESS SENSOR to OFF. BRIGHTNESS SENSOR SETTING (When connected to the PN-ZR01 (optional) only) Performs adjustments to the brightness sensor. Set the surrounding brightness and the current screen luminance to AMBIENT BRIGHTNESS and SCREEN BRIGHTNESS. Even if brighter or darker than the set AMBIENT BRIGHTNESS, the screen brightness will not change. COPY SETTING VALUE When the monitor has been connected to multiple monitors with RS-232C, you can copy the primary setting details to the secondary. of the monitor that you would like copy to MENU with COPY TO ID No. , then select COPY and press . *  ertain setting details such as ANALOG GAIN, ANALOG C OFFSET, and DISPLAY COLOR PATTERN cannot be copied. LOGO SCREEN Sets whether or not to display the logo screen. 25 E Menu Items nOPTION DATE/TIME SETTING Set the date and time. Press to select the date or or to change the numerical and time, and press values. DATE. . . . . . . . . . . . . . . . . . .  M/DD/YYYY M DD/MM/YYYY YYYY/MM/DD (YYYY: Year, MM: Month, DD: Day) TIME. . . . . . . . . . . . . . . . . . . .  elect 12- or 24-hour time. S SCHEDULE (See page 29. ) You can turn the power on/off and change the screen brightness at a specified time. INPUT SELECT Select the input mode to be used in PC/AV DVI-D input terminal, PC/AV HDMI input terminal and PC RGB/AV component input terminals. AUDIO SELECT Selects the terminal used to input audio signals in each input mode. INPUT SIGNAL (PC D-SUB/PC RGB) If a computer connected to the PC D-sub/PC RGB input terminal outputs any of the following resolutions, make a selection from the following options. 480 LINES. . . . . . . . . . .  UTO, 640x480 or 848x480 A 768 LINES. . . . . . . . . . .  UTO, 1024x768, 1280x768, 1360x768 or A 1366x768 1050 LINES. . . . . . . . . 1400x1050 or 1680x1050 ZOOM2 SPECIAL SETTING (See page 29. ) SCAN MODE (AV input) Sets the scan mode used for AV mode input. Otherwise, over-scan display POWER MANAGEMENT POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode. COLOR SYSTEM (AV S-VIDEO/AV VIDEO) Select the color system of the AV equipment which is connected to AV S-video and AV video input terminal. (AUTO / PAL / PAL-60 / SECAM / NTSC3. 58 / NTSC4. 43) When AUTO is selected, the color system is automatically set according to the input signal. AUDIO OUTPUT(RCA) Sets the volume of sound output from the audio output terminals. When set to VARIABLE2, audio is not output from the external speaker terminals. [. . . ] * Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is input. * The frequency values for the Sun are reference values. 57 E Specifications nCompatible signal timing (AV) Screen resolution 1920 × 1080p*1 Frequency 24Hz 50Hz 59. 94Hz 60Hz 50Hz 59. 94Hz 60Hz 50Hz 59. 94Hz 60Hz 50Hz 59. 94Hz 60Hz 59. 94Hz 60Hz 50Hz 59. 94Hz 60Hz DVI-D*2 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes HDMI Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Component Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 1920 × 1080i*1 1280 × 720p 720 × 576p 720 × 480p 640 × 480p(VGA) 720(1440) × 576i 720(1440) × 480i *1 Displays a reduced image, except in Dot by Dot. In Dot by Dot, the image will be cut down to panel size then displayed. *2 Available when the PN-ZB02 (optional) is attached. E 58 Specifications nPC/AV DVI-D (DVI-D 24 pin) input terminal pins nPC/AV HDMI input (HDMITM Connector) terminal pins No. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP PN-V600




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP PN-V600 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.