User manual SHARP QA-25

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP QA-25. We hope that this SHARP QA-25 user guide will be useful to you.


SHARP QA-25 : Download the complete user guide (704 Ko)

You may also download the following manuals related to this product:

   SHARP QA-25 (725 ko)
   SHARP QA-25 (639 ko)
   SHARP QA-25 (681 ko)

Manual abstract: user guide SHARP QA-25

Detailed instructions for use are in the User's Guide.

[. . . ] It means that used electrical and electronic products should not be mixed with general household waste. If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements. By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling. In other Countries outside the EU If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal. [. . . ] The less time the air conditioner is used, the lower the running costs. The air conditioner should be placed on a firm foundation to minimize noise and vibration. For safe and secure positioning, place the unit on a smooth, level floor strong enough to support the unit. The unit has casters to aid placement, but it should only be rolled on smooth, flat surfaces. The unit must be placed within reach of a properly rated grounded socket. Allow at least 30 cm of space from the wall for efficient air-conditioning. Insert batteries into the compartment, making sure the ± and -- polarities are correctly aligned. Lines will appear on the display when batteries are properly installed. When replacing the batteries, always change both batteries at the same time, and make sure they are the same type. If the remote control does not operate normally after replacing the batteries, press the RESET button using a thin pointed implement. If you will not be using the unit for a prolonged period, remove the batteries from the remote control. In this mode, the air conditioner simply circulates the air without cooling it. Install the exhaust hose (See Page 8), turn the drainage nozzle to the CLOSE position, and check the drainage nozzle is covered with the stopcock. Although the louvers are closed and no air blows out into the room, the external ventilation fan speed changes. Install the exhaust hose (See Page 8), turn the drainage nozzle to the CLOSE position, and check the drainage nozzle is covered with the stopcock. Press the SWING button again when the horizontal louvers are at the desired position. The adjusted position will be memorized and the same position will be set automatically when operated the next time. During VENTILATION mode, UP/DOWN air flow direction cannot be changed. Manual adjustment of the horizontal louvers can cause the unit to malfunction when the remote control is used for adjustment. When the horizontal louvers are positioned at the lowest position in the COOL or DEHUMIDIFICATION mode for an extended period of time, condensation may result. Do not adjust the vertical louvers to the extreme left or right in the COOL mode with the fan speed set to "QUIET ( )" for an extended period of time. In this operation, the air conditioner fan works at extra high speed with a setting temperature of 15°C. [. . . ] If the filter is clogged with dust, the airflow will be reduced, resulting in poor cooling performance. Gently pull the filter handle to the right and slide the filter out of the unit. If the filters are very dirty, wash them with detergent and rinse carefully with clean water. Wipe them with a soft, dry cloth or with a cloth moistened with a mild soap. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP QA-25




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP QA-25 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.