User manual SHARP QT-80W

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP QT-80W. We hope that this SHARP QT-80W user guide will be useful to you.


SHARP QT-80W : Download the complete user guide (992 Ko)

You may also download the following manuals related to this product:

   SHARP QT-80W (1175 ko)
   SHARP QT-80W (436 ko)
   SHARP QT-80W annexe 1 (436 ko)

Manual abstract: user guide SHARP QT-80W

Detailed instructions for use are in the User's Guide.

[. . . ] Q If the unit does not work properly, set the FUNCTION switch to STAND-BY and then to ON again. Q This unit should only be used within the range of 5°C - 35°C (41°F - 95°F). Q The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. [. . . ] Q Before loading a tape into the cassette compartment, tighten the slack with a pen or pencil. q Cassettes have removable tabs that prevent accidental recording or erasing. Removing the tab will protect the corresponding side from being erased. Precautions: q Be sure not to press the PLAY 0 and REWIND 3 buttons simultaneously, or the tape will become damaged. Q Before changing from one tape operation to another, press the STOP/EJECT s 7 button. Q Do not press the PAUSE 6 button whilst the fast forward or rewind operations are in progress. The F FWD 2 or REWIND 3 button will not be released when the tape end is reached. Before recording: q When recording important selections, make a preliminary test to ensure that the desired material is properly recorded. Q SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. Q The ALC (Automatic Record Level Control) circuit automatically controls the level of the input signal used for recording. Q The VOLUME and X-BASS controls may be adjusted with no effect on the recorded signal. (Variable Sound Monitor) q Metal and CrO2 tapes cannot be used for recording. S Recording from the radio s Recording from the built-in microphone 1 Set the FUNCTION switch to RADIO. 4 Load a blank cassette into the cassette compartment with the side to be record- 4 Press the RECORD q button. [. . . ] Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. Q After long use, the deck's heads and capstan may become magnetised, causing poor sound. Demagnetise these parts once every 30 hours of playing/recording by using a commercial tape head demagnetiser. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP QT-80W




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP QT-80W will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.