User manual SHARP QT-CD20H

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP QT-CD20H. We hope that this SHARP QT-CD20H user guide will be useful to you.


SHARP QT-CD20H : Download the complete user guide (467 Ko)

You may also download the following manuals related to this product:

   SHARP QT-CD20H (471 ko)
   SHARP QT-CD20H (537 ko)
   SHARP QT-CD20H (510 ko)
   SHARP QT-CD20H (501 ko)
   SHARP QT-CD20H (537 ko)

Manual abstract: user guide SHARP QT-CD20H

Detailed instructions for use are in the User's Guide.

[. . . ] AND IRELAND The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug must be used. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three pin plug. Before replacing the plug cover, make sure that: If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug. [. . . ] Press the button to skip to the beginning of the current chapter (track). Press the button again to skip to the beginning of the previous chapter (track). Notes: !Some discs do not display the chapter (track) and the skip feature is disabled. to off (see page 24). 18 QT-CD20H_UK_3. fm 9HX80432100003 04/6/8 Useful operation " To start playback from the desired point (direct play) To select and play the desired title and chapter: Some of these functions are only available on the remote control. QT-CD20H 1 " Still picture/Frame advance You can freeze the image and advance frame by frame. 1 In the playback mode, press the GOTO button. TV screen 1 2 3 Whilst a disc is playing, press the STEP Playback is paused. or button. 2 TITLE 01/02 CHAPTER 001/002 Each press of the STEP The or button advances the frame. 2 " Slow-motion play You can slow down the playback speed. DVD Operation If the track number is 2 digits or more, press "+10" and enter the number. Example: To select chapter 12, press "+10" and "2". To select chapter 22, press "+10", "+10" and "2". Note: Still and frame advance features are disabled on some discs. - Basic operation / Useful operation - Within 10 seconds, select the title or chapter by pressing the or button and enter the title or chapter number using the direct number buttons. button does not allow you to operate this function on SVCD/VCD. Press the PLAY/PAUSE / button to return to normal playback. 3 4 3 Within 10 seconds, press the ENTER button. Notes: 1 !With DVDs, you can specify the desired point only in the current title and not in another title. Whilst a disc is playing, press the SLOW or button. SF 2X To play by specifying time (time search): You can play back from the desired point by specifying the time. Each time the button is pressed, the speed of slow-motion play changes in the following sequence. DVD: SVCD/VCD: 5 1 In the playback mode, press the GOTO button twice. TITLE 02/12 TIME __ : __ : __ or button repeatedly. SF 2 SF 4 / SR 2 / SR 4 / SR 6 / SR 8 SF 2 SF 4 SF 6 SF 8 Play 6 If the "_ _:_ _:_ _" is not highlighted, press the SF 6 SF 8 Play 2 Within 10 seconds, specify the time with the direct number buttons, and then press the ENTER button. TITLE 02/12 TIME 01:23:40 7 2 Press the PLAY/PAUSE / button to return to normal playback. !To specify 1 hour 23 minutes and 40 seconds, enter "012340". The button does not allow you to operate slow-motion play on SVCD/VCD. Notes: 8 !Time search feature is disabled on some discs. 19 QT-CD20H_UK_3. fm 9HX80432100003 04/6/8 QT-CD20H Useful operation (continued) " To change the angle You can change the angle of view when playing a DVD disc that contains scenes recorded from multiple angles. " To play repeatedly (repeat play) You can play a chapter (track) or a title repeatedly by specifying it during playback. When " " is displayed in the upper right corner of the TV screen, press the ANGLE button repeatedly to select the desired angle number. SYSTEM NTSC 2 DVD: Current title number Current chapter number TITLE 02/05 CHAPTER 001 / 008 00:30:21 SVCD/VCD/Audio CD: SINGLE ELAPSED 00:01:16 Indicator PAL MULTI. Select this mode for the NTSC TV. Total number of chapters Total number of titles Elapsed playback time for the current title TITLE REMAIN 00:45:00 Elapsed playback time for the current track 3 Remaining playback time for the current title Remaining playback time for the current track CHAPTER ELAPSED 00:01:23 Elapsed playback time for the current chapter CHAPTER REMAIN 00:03:03 TOTAL ELAPSED 00:12:40 - Various settings - SINGLE REMAIN 00:03:21 DVD Operation 4 5 Total elapsed playback time for the disc Remaining playback time for the current chapter OFF TOTAL REMAIN 00:48:54 00:05:21 6 MP3: CHAPTER ELAPSED Total remaining playback time for the disc Elapsed playback time for the current track OFF CHAPTER REMAIN 00:02:35 7 Remaining playback time for the current track Note: When P. B. C. is set to ON for SVCD or VCD, total playback time and total remaining playback time do not appear. OFF 8 23 QT-CD20H_UK_3. fm 9HX80432100003 04/6/8 QT-CD20H Video CD and Super Video CD playback The following playback functions are the same as DVD or CD operations. " Video CD with P. B. C. (playback control) 1 Press the PLAY/PAUSE / button. 1 2 Video CD and Super Video CD Operation - Video CD and Super Video CD playback - Page Playback . 20 To play the contents between the specified points repeatedly (A-B repeat) . The menu appears on the TV and playback is paused. 2 Select the desired menu number using the direct number buttons. !Select the menu number to play. To interrupt playback: Press the PLAY/PAUSE / button. To resume playback from the same point, press the PLAY/PAUSE / button. To stop playback: Press the STOP button. button on the main unit. To stop the current operation and return to the menu: To scroll the menu screen (menu screen with more than 1 page): Press the or button. Subtitles and sounds on the super video CD can be switched (see page 22). function, use the PBC ON/OFF button to activate or deactivate the function. [. . . ] The performance specification figures indicated are nominal values of production units. Power source AC 230 - 240 V, 50 Hz DC 12 V ["D" size (UM/SUM-1, R20 or HP-2) battery 8] DC 3 V ["AA" size (UM/SUM-3, R6 or HP-7) battery 2 for memory] 23 W RMS: 10 W (5 W + 5 W) (10 % T. H. D. , 1 kHz) 8 cm full-range speaker Width: 420 mm Height: 150 mm Depth: 260 mm 5. 2 kg PAL/NTSC colour 2 QT-CD20H 1 WRONG REGION Maintenance !Cleaning the cabinet Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth. " Do not use chemicals for cleaning (petrol, paint thinner, etc. ). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP QT-CD20H




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP QT-CD20H will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.