User manual SHARP SD-FX1

[. . . ] Sharp SD-FX1 1 bit Stereo System · The corresponding page number from the Japanese manual is listed on the right side of the function description. SHARP SD-FX1 Users Guide Changing the display color 1-Press DISPLAY at least 2 seconds 2-Press CURSOR BACK/FORWARD to choose "Color" 3-Press ENTER then press CURSOR BACK/FORWARD to choose mode -Initial: Automatic color change according to unit operations -Fixed: Set to users' desired color -Weekly: Daily color changes -Random: Random color changes 4-Press ENTER 5-If "Fixed" or "Weekly" is choosen press CURSOR BACK/FORWARD to choose color then press ENTER pg19 Turning OFF display 1-Press DISPLAY at least 2 seconds 2-Press CURSOR BACK/FORWARD to choose "Dimmer on" or "Dimmer off" then press ENTER pg19 Setting the clock 1-Press TIMER /DELETE 2-Press CURSOR BACK/FORWARD to choose "Time adjust" 3- Press ENTER 4-Press BACK/FORWARD to set year, press ENTER 5-Press BACK/FORWARD to set month, press ENTER 6-Press BACK/FORWARD to set day, press ENTER 7-Press BACK/FORWARD to set hour, press ENTER 8-Press BACK/FORWARD to set minute, press ENTER -To reconfirm time/date when power is off press DISPLAY, when power is on press TIMER/DELETE and then CURSOR BACK/FORWARD and time will display pg20 Checking display during playback 1-Press TIME on remote repeatedly to display: track time elapsed, time remaining, disc time remaining 2-Press DISPLAY repeatedly for CD level meter, CD text info and for MD level meter, text info, remaining recordable time, recording date and time pg25/29 Listening to the radio 1-Press TUNE/BAND and choose FM or AM 2-Press TUNING BACK/FORWARD to choose station Auto: Manual: pg30 Pre-setting radio stations 1-Tune in to desired station 2-Press ENTER on remote 3-Press TUN. /PRESET within 5 seconds then CURSOR BACK/FORWARD to choose the pre-set number 4-Press ENTER within 5 seconds pg32 Listening to pre-set stations 1-Press TUNER/BAND 2-Press TUN. /PRESET BACK FORWARD to choose pre-set number -To erase all pre-sets 1-Press CLEAR on remote for at least three seconds, "Tuner clear" will display 2-Press ENTER on remote pg32 Adjusting volume and tone X-BASS (emphasises bass tone) 1-Press X-BASS, on/off displays Adjusting tone (pre-set equalizer) 1-Press PRE-EQ to choose one of four pre-set tones: Flat, Soft, Heavy, Vocal pg33 Using Repeat and Random modes 1-After stopping playback press PLAY MODE to choose playback mode: Normal, Repeat, Random 2-Begin playback pg35 Using program mode 1-Stop playback 2-Press PROGRAM 3-Press numeral keys to choose track (pressing CLEAR during programming will erase last track) 4-After completion of programming press CD/MD STOP 5-To start playback press CD/MD PLAY -To check programmed track order press BACK FORWARD keys while playback is stopped -To add new tracks to program follow steps 1-4. [. . . ] High speed copying limitations: After the first copy of a CD is made there is an automatically imposed waiting period before another high speed copy of the same CD can be made. For example: If a CD to MD recording finishes in 40 minutes you will have to wait 34 minutes before another high speed copy of same CD is made. If the recording was 74 minutes, a 74 minute waiting period will apply. -If another copy is needed immediately recording can be done in normal recording speed. -If high speed recording is interrupted or if even only one song is recorded a waiting period will apply. -If high speed recordings are made from 20 different CDs consecutively a waiting period will be imposed before the 21st CD can be recorded in high speed mode pg50 Titiling a recorded MD 1-Stop MD playback 2-Press NAME/TOC EDIT 3-Press BACK/FORWARD to choose "Disc Name" 4-Press ENTER (to quit this function press NAME/TOC EDIT) 5-Using the following keys enter characters: 1, ^10, TIME, DISPLAY to switch between Japanese kana and Roman alphabet press DISPLAY to switch between capital and lower case letters press ^10 6-When titiling is complete press ENTER to save information pg52 Titiling a track 1-While song to be titiled is playing press NAME/TOC EDIT 2-Press ENTER (while in this mode track will repeat) To quit this mode press NAME/TOC EDIT 3-Follow steps 5-6 of "Titiling a recorded MD" -The chart on page 54 shows the characters possible with each key. [. . . ] -Unplugging power cord or a power outage will erase all time settings! [. . . ]