User manual SHARP VC-D806S
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP VC-D806S. We hope that this SHARP VC-D806S user guide will be useful to you.
You may also download the following manuals related to this product:
SHARP VC-D806S (2021 ko)
Manual abstract: user guide SHARP VC-D806S
Detailed instructions for use are in the User's Guide.
[. . . ] Please refer to the relevant laws in your country.
G
No part of this publication may be reproduced, stored or transmitted in any form without prior permission from SHARP Electronics (UK) Ltd.
DELUXE
G
® and PlusCode® are registered trademarks of Gemstar Development
Corporation.
G G G
DELUXE
system is manufactured under license from Gemstar Development Corporation.
NEXTVIEWTM
Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.
THIS MANUAL COVERS A RANGE OF MODELS. ALL OF THE FEATURES MENTIONED MAY NOT NECESSARILY APPLY TO YOUR VCR.
SAFETY WARNINGS Observe all warnings for your safety and to ensure trouble free use of your VCR. INFORMATION Additional information complements instructions.
(i)
REMOTE CONTROL
TV OPERATE
CHANNEL
TIMER ON/OFF
1. [. . . ] Press [ / ] to select standard play (SP), long play (LP) or extended play (EP) as required.
11. Using the [ / ] will select VPS/PDC ON or OFF ( * = ON - = OFF).
1/2 DA T E P R S T AR T S T OP 21 / 06 02 12 : 00 13 : 00 9 / 0 7D0 3 2 1 : 0 5 2 2 : 3 0 --/-- --:--:---/-- --:--:-SP * LP * -----
12. Press SET to confirm.
· The MENU now shows all the timer settings you have entered. If you wish to make additional timer recordings, repeat this procedure. When you have completed entering timer
1/2 DA T E P R S T AR T S T OP 21 / 06 02 12 : 00 13 : 00 9 / 0 7 D 0 3 2 1 : 0 5 22 : 3 0 --/-- --:--:---/-- --:--:-SP * LP -----
14. Ensure that the tape on which you wish to
record is inserted into the VCR, then press TIMER ON/OFF once to place the VCR in TIMER POWERSAVE/TIMER STANDBY mode. will be shown on the display.
NOTES:
· It is essential that the start time as it appears in the TV listing is used to program the VCR, as this information is used to identify the VPS/PDC signal corresponding to your programme. VPS/PDC is a signal broadcast by some TV stations which adjusts the start and stop time of your VCR recording. This ensures that if there is a change in broadcast time for your programme the VCR will still record the whole programme. If the video tape is ejected when the VCR tries to record the record protection tab has been removed. If there are further recordings to be made, the VCR will return to TIMER POWERSAVE/TIMER STANDBY. Press MENU, to exit to normal screen.
NOTES:
· · · · · If the tape being played back does not carry sound recorded on Hi-Fi tracks, L and R will not appear on the display. lf the sound contains `crackling' or `popping' noises the sound quality may be improved by adjusting the tracking using CHANNEL / . If the poor quality is for a long period the VCR will automatically select the mono track and the sound will be in mono. In this case the VCR automatically switches to receive the mono signal. If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours) or www. sharp. co. uk/support
20
ADVANCED OPERATION
AUDIO AND YOUR VCR CONNECTING TO AUDIO EQUIPMENT
The diagram below shows how to connect your VCR to audio equipment. When connected in this way stereo sound is possible from the speakers.
EXISTING AERIAL CABLE
BACK OF TELEVISION
RF CONNECTION CABLE
S-VIDEO CABLE
AERIAL IN
ANTENNA IN ENTREE ANTENNE
G D
S-VIDEO OUT SORTIE SON S-VIDEO
RF OUT SORTIE ANTENNE
AUDIO OUT L and R AUDIO PHONO LEADS (NOT SUPPLIED)
RF-OUT
+
AMPLIFIER
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours) or www. sharp. co. uk/support
21
ADVANCED OPERATION
AUDIO DUBBING
RECORDING SOUND ON TO A VIDEO TAPE (AUDIO DUBBING)
This feature enables you to add narration or background music to a pre-recorded tape. The Hi-Fi track will remain unchanged. .
Connect your audio equipment to AUDIO IN L-R terminals on the front of your VCR.
If a microphone is to be used, connect it to your audio equipment
+
AUDIO SOURCE
1. Connect the audio source to the AUDIO
IN L-R terminals on the front of the VCR as shown above.
2. If you wish to listen to the original Hi-Fi
track while you are recording the new dubbed audio track you will need to set AUDIO MIX to ON in the mode menu.
5. Press PAUSE/STILL (
) when you reach the point on the tape where you want audio dubbing to start. Press A. DUB (A. DUB will be shown on
NOTE: The input source will be automatically changed to L3 (Front phono jacks)
SP
7. [. . . ] Example; VCR preset 1 = BBC1 and VCR preset 14 = BBC1 (Refer to Manually Sorting Channels section to move the channel to your desired position. ) · TV aerial may need adjusting. · Check all connecting cables.
Standard S-VHS S-VHS ET VHS
Tape Speed
SP LP EP SP LP EP SP LP EP
PAL
Recording Play Back YES YES YES YES YES YES YES YES YES YES YES YES YES YES
SECAM
Recording Play Back NO NO NO NO NO NO
NTSC
Recording NO NO NO NO NO NO Play Back YES (Note1) YES (Note1) YES (Note1) YES (Note1) YES (Note1) YES (Note1) YES (Note1)
NOTE1 : Playback on PAL-60 TV - : non standard mode
If problems persist contact the SHARP Helpline on tel: 08705-274277 (office hours) or www. sharp. co. uk/support
51
VCR RESET
1. Press and hold MENU and the CHANNEL (
/ ] buttons together for 10 seconds.
VCR RESET IS NOW COMPLETE
Please continue with your previous procedure.
RF CHANNEL TUNING
If you have a preferred RF output channel, this can be set manually (21-69) by following the procedure below:
1. The channel number can now be changed by using the CHANNEL (
buttons. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP VC-D806S
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP VC-D806S will begin.