User manual SHARP XG3780E OPERATION MANUAL

[. . . ] DANGER: The fuse should be removed from the cut-off plug and the plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW: Earth BLUE: Neutral BROWN: Live As the colours of the wires in this mains lead may not correspond with coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN-AND YELLOW must be connected to the terminal in the plug which is marked with the letter E, or by the safety earth symbol Å@, or coloured green or greenand-yellow. [. . . ] The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. The printer driver enables you to use the printer function of the machine. The scanner driver allows you to use the scanning function of the machine with TWAIN-compliant and WIA-compliant applications. Sharpdesk is an integrated software environment that makes it easy to manage documents and image files, and launch applications. Button Manager allows you to use the scanner menus on the machine to scan a document. Check the following hardware and software requirements in order to install the software. 0 (ServicePack 5 or later)*5, Windows 2000 Professional*5, Windows XP Professional*5, Windows XP Home Edition*5 Display 800 x 600 dots (SVGA) display with 256 colors (or better) Hard disk free space 150MB or more Other hardware An environment on which any of the operating systems requirements listed above can fully operate *1 The machine's USB connector will transfer data at the speed specified by the USB 2. Be sure to allow the required space around the machine for servicing and proper ventilation. Do not drop the machine, subject it to shock or strike it against any object. Store spare supplies such as drum cartridges and TD cartridges in a dark place without removing from the package before use. If they are exposed to direct sunlight, smudges on copies may result. Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy efficiency. A small amount of ozone is produced within the unit during operation. However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the unit in a ventilated area. In some areas, the "POWER" switch positions are marked "I" and "O" on the copier instead of "ON" and "OFF". [. . . ] However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the unit in a ventilated area. In some areas, the "POWER" switch positions are marked "I" and "O" on the copier instead of "ON" and "OFF". The symbol "O" denotes the copier is not completely de-energized but in a standby condition at this "POWER" switch position. [. . . ]