User manual SHARP XL-40H/50H

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP XL-40H/50H. We hope that this SHARP XL-40H/50H user guide will be useful to you.


SHARP XL-40H/50H : Download the complete user guide (855 Ko)

You may also download the following manuals related to this product:

   SHARP XL-40H/50H (890 ko)
   SHARP XL-40H/50H (783 ko)
   SHARP XL-40H/50H (1229 ko)
   SHARP XL-40H/50H (1037 ko)
   SHARP XL-40H/50H (1227 ko)
   SHARP XL-40H/50H (1102 ko)
   SHARP XL-40H/50H (856 ko)
   SHARP XL-40H/50H OPERATION MANUAL (890 ko)
   SHARP XL-40H/50H OPERATION MANUAL (783 ko)
   SHARP XL-40H/50H OPERATION MANUAL (1037 ko)

Manual abstract: user guide SHARP XL-40H/50H

Detailed instructions for use are in the User's Guide.

[. . . ] AND IRELAND The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug must be used. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three pin plug. Before replacing the plug cover, make sure that: If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug. [. . . ] Always remove the USB memory device after "UNPLUG OK" appears on the display. Improper removal of the USB memory device may cause irregularities such as continuous appearance of "FAT READING". Should this happen, turn off the unit and then turn it on again. or ) FOLDER number Total files in Folder 2 USB Memory Playback To start playback with folder mode on, go to step 4. To change the playback folder, press the TUNING ( button to select another folder. or ) or 2 Disconnect USB memory device from the USB terminal. 3 4 Select desired file to be played back by pressing the button. Press the / (USB / ) button. Title, Artist & Album name are displayed if they are recorded in the USB memory device. Display content can be changed by pressing the DISPLAY button. File Name Display ( ·TITLE-1 Indicator Title Display Function Display ( ·TITLE-2 Indicator Artist Display ( ) ( ·TITLE-3 Indicator Clock Display Album Display ( ) Only appears when clock is already set. Note: To pause playback: Press the USB button. Auto power off function: In the stop mode of USB operation, the main unit enters the stand-by mode after 15 minutes of inactivity. 24 Notes: SHARP will not be held liable for the loss of data whilst the USB memory device is connected to the audio system. Files compressed in MP3 and / or WMA format can be played back when connected to the USB terminal. SHARP cannot guarantee that all USB memory devices will work on this audio system. USB cable is not recommended for use in this audio system to connect to USB memory device. Use of the USB cable will affect the performance of this audio system. Select the bitrate before starting recording. After the selected song finishes playing, the unit will stop playback and recording process automatically and "WRITING USB" will be displayed for a few seconds. Disc Recording (for CD) or Disc Copy (for MP3 disc) USB Memory Playback Press the MODE button and "BIT RATE" will be displayed and then press ENTER button. Within 10 seconds, press the or button to select the desired bitrate, and press the ENTER button. [128 kbps] [192 kbps] [96 kbps] 1 2 Perform steps 1 - 5 in "Listening to a CD or MP3/WMA disc" section on page 16. Whilst in the stop mode, press the RECORD button to start USB recording. "REC START" will be displayed for a few seconds and recording will start after the USB device has been initialised. 3 4 During disc recording, the display will show normal CD playback but during disc copy process for MP3 disc, "COPY" will be displayed. After the last track of the disc is played, the unit will stop playback and recording process automatically, and "WRITING USB" will be displayed for a few seconds. One File Recording (for CD) or One File Copy (for MP3 disc) 1 2 3 4 Perform steps 1 - 5 in "Listening to a CD or MP3/WMA disc" section on page 16. "REC START" will be displayed for a few seconds and recording will start after the USB device has been initialised. During file recording, the display will show normal CD playback but during file copy process for MP3 disc, "COPY" will be displayed. [CD] [MP3] Programme Recording (for CD only) 1 2 Perform steps 1 - 6 in "Programmed play" section on page 20. Whilst in the stop mode, press the RECORD button to start USB recording. "REC START" will be displayed for a few seconds and recording will start after the USB device has been initialised. During recording process, the display will show normal CD programme playback. After the last programme track is played, the unit will stop playback and recording process automatically, and "WRITING USB" will be displayed for a few seconds. 3 4 26 XL-UR250H(BK) XL-UR2110H(BK) One folder copy (for MP3 disc only) 1 2 Perform steps 1 - 2 in "Procedure to playback MP3/WMA disc" section on page 22. [. . . ] Carrying the unit with discs left inside can damage the unit. Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. Care of compact discs Compact discs are fairly resistant to damage, however mistracking can occur due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP XL-40H/50H




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP XL-40H/50H will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.