User manual SHARP XL-DK227NH

[. . . ] ENGLISH XL-DK227NH ENGLISH Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Contents General Information Page Precautions . 3 - 5 Special Note Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating streaming applications (via Internet, intranets and/or other networks), other revenuegenerating content distribution systems (pay-audio or audio-ondemand applications and the like) or on revenue-generating physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). [. . . ] If file 3 inside Folder C is selected, all the files starting from file 3 will be played back until file 10 of Folder E. Folder Mode On case: All the files inside the selected folder will be played back. File 9 and 10 in Folder E will not be played back. ROOT (FOLDER 1) FOLDER A (FOLDER 2) FOLDER C (FOLDER 4) FOLDER D (FOLDER 5) FILE 3 FILE 4 FILE 5 FILE 6 FILE 7 FILE 8 FOLDER E (FOLDER 6) FILE 9 FILE 10 FOLDER B (FOLDER 3) FILE 1 FILE 2 E-20 CD or MP3/WMA disc Playback XL-DK227NH MP3/WMA folder mode (only for MP3/WMA files) (continued) Procedure to play back MP3/WMA disc with folder mode on To play back CD-R/RW. ENGLISH 4 Press the / (CD / ) button. Title, Artist & Album name are displayed if they are recorded on the disc. File Name Display TITLE-1 Indicator 1 Press the CD button, and load an MP3/WMA disc. MP3 Indicator WMA Indicator Disc Name TOTAL Indicator Total number of files Title Display CD or MP3/WMA disc Playback Function Display TITLE-1 Indicator Artist Display 2 Press the FOLDER button, and press the TUNING ( or ) button to select desired playback folder. (Folder mode on) FOLDER Indicator ( ) TITLE-1 Indicator Clock Display Album Display FOLDER Number Total files in Folder 3 3 Select desired file to be played back by pressing the or button. In case of playback with the folder mode on, press the TUNING ( or ) button, and the folder can be selected even though it is in playback/pause mode. It will continue playback/pause mode in the 1st track of the selected folder. Note: If "NO SUPPORT" is displayed, it means "Copyright protected WMA file" or "Not supported playback file" is selected. E-21 Listening to the radio Tuning XL-DK227NH ENGLISH 1 2 3 Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). Auto power on function: When you press any of the following buttons, the unit turns on. TUNER (BAND) button (main unit and remote control): The unit turns on and the "TUNER" function is activated. / button on the main unit: The unit turns on and playback of the last function starts (CD, TUNER, AUDIO IN, iPod). Press the TUNING ( or ) button on the remote control to tune in to the desired station. Manual tuning: Press the TUNING ( or ) button as many times as required to tune in to the desired station. Auto tuning: When the TUNING ( or ) button is pressed for more than 0. 5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Notes: When radio interference occurs, auto scan tuning may stop automatically at that point. When an RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light up. Full auto tuning can be achieved for RDS stations "ASPM", see page 25. To receive an FM stereo transmission: Press the TUNER (BAND) button to select stereo mode and "ST" indicator will be displayed. If the FM reception is weak, press the TUNER (BAND) button to extinguish the "ST" indicator. FM stereo mode indicator FM stereo receiving indicator E-22 Radio XL-DK227NH Listening to the radio (continued) Memorising a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) ENGLISH To recall a memorised station Press the PRESET ( or select the desired station. ) button for less than 0. 5 seconds to 1 2 Perform steps 1 - 3 in "Tuning" on page 22. [. . . ] Does the remote control sensor receive strong light? General Symptom The clock is not set to the correct time. (Refer page 11) Set the unit to the power standby mode and then turn it back on. Are the speaker wires disconnected? Tuner Symptom The radio makes unusual noises continuously. Move the aerial away from the AC power lead if it's located nearby. CD player Symptom Playback does not start. [. . . ]