User manual SHIMANO BL-TT78

[. . . ] SI-8UN0A-002-00 General Safety Information CAUTION · Improper use of your bicycle's brake system may result in a loss of control or an accident, which could lead to a severe injury. [. . . ] Loose, worn or damaged parts may cause the bicycle to fall over and serious injury may occur as a result. · Read these Technical Service Instructions carefully, and keep them in a safe place for later reference. <Points to note about the handlebars> · Handle inner diameter: 19. 0 - 22. 5 mm · Handle outer diameter: 22. 2 - 24. 0 mm · Applicable handlebars: Carbon fiber handlebars (with aluminum inserts where the brake levers are installed) or aluminum handlebars * Carbon fiber handlebars without aluminum inserts where the brake levers are installed cannot be used. NOTE: · Parts are not guaranteed against natural wear or deterioration resulting from normal use. · For maximum performance we highly recommend Shimano lubricants and maintenance products. · For any questions regarding methods of handling or maintenance, please contact the place of purchase. Technical Service Instructions SI-8UN0A-002 3. Install the inner cable BL-TT78 Brake lever Outer holder In order to realize the best performance, we recommend that the following combination be used. Brake lever Caliper brake Brake cable BL-TT78 BR-7800 / BR-6600 / BR-5600 Outer casing Inner cable Installation of the brake lever 1. [. . . ] Phone: +1-949-951-5003 Turn the reach adjustment bolt with a flat-tipped screwdriver having a tip width of 3mm and a thickness of 0. 5mm. When installing the components to carbon frame/handle bar surfaces, verify with the manufacturer of the carbon frame/parts for their recommendation on tightening torque in order to prevent over tightening that can cause damage to the carbon material and/or under tightening that can cause lack of fixing strength for the components. Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan * Service Instructions in further languages are available at : http://techdocs. shimano. com Please note: specifications are subject to change for improvement without notice. [. . . ]