User manual SHIMANO BL-TT79 ASSEMBLY

[. . . ] SI-8UV0A-002-00 General Safety Information CAUTION · Improper use of your bicycle's brake system may result in a loss of control or an accident, which could lead to a severe injury. [. . . ] · Obtain and read the service instructions carefully prior to installing the parts. Loose, worn or damaged parts may cause the bicycle to fall over and serious injury may occur as a result. · Read these Technical Service Instructions carefully, and keep them in a safe place for later reference. <Points to note about the handlebars> · Handle inner diameter: 19. 0 - 22. 5 mm · Handle outer diameter: 22. 2 - 24. 0 mm · Applicable handlebars: Carbon fiber handlebars (with aluminum inserts where the brake levers are installed) or aluminum handlebars * Carbon fiber handlebars without aluminum inserts where the brake levers are installed cannot be used. NOTE: · Use a soft cloth to clean the carbon fiber levers, and be sure to moisten the cloth with neutral detergent before using it, otherwise the lever material may become damaged and lose its strength. · Avoid leaving the carbon fiber levers in places where high temperatures are present. · Parts are not guaranteed against natural wear or deterioration resulting from normal use. · For maximum performance we highly recommend Shimano lubricants and maintenance products. · For any questions regarding methods of handling or maintenance, please contact the place of purchase. Technical Service Instructions SI-8UV0A-002 3. [. . . ] Phone: +1-949-951-5003 Turn the reach adjustment bolt with a flat-tipped screwdriver having a tip width of 3mm and a thickness of 0. 5mm. When installing the components to carbon frame/handle bar surfaces, verify with the manufacturer of the carbon frame/parts for their recommendation on tightening torque in order to prevent over tightening that can cause damage to the carbon material and/or under tightening that can cause lack of fixing strength for the components. Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222 3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan * Service Instructions in further languages are available at : http://techdocs. shimano. com Please note: specifications are subject to change for improvement without notice. [. . . ]