User manual SIEMENS ET515502

[. . . ] EN Instruction manual 3 Table of contents Important information . Only after read ing these will you be able to operate the appliance correctly. If the appliance is passed to another per son, please enclose the instructions. Before switching on your appliance Transport damage Check your appliance after removing the packaging. If it has suffered any damage during transport, do not connect the appliance but contact the Technical Ser vices department. [. . . ] When the cooking time has elapsed, the hotplate switches off automatically. 1. Set the heat setting on the hotplate which is to be operated with the timer function. 2. If you select a different hotplate, touch the and symbols repeatedly and at the same time until the 1 indicator for the required hotplate flashes. 3. For : 30 minutes For : 10 minutes The 1 indicator for the hotplate flashes again. 4. Touch the or symbol until the desired cooking time appears in the timer indicator. If you have set a cooking time for several hotplates, it is always the shortest cooking time that is displayed. The 1 hotplate indicators light up. 16 When the cooking time has elapsed When the cooking time has ended, the hotplate switches off. Touch the and symbols repeatedly and at the same time until the required 1 indicator flashes. Touch the and symbols repeatedly and at the same time until the required 1 indicator flashes. If you would like to call up the remaining cooking time for a hotplate: Touch the and symbols repeatedly and at the same time until the 1 indicator for the relevant hotplate flashes. The timer function is no longer active after a power cut. Changing the cooking time Cancelling prematurely Notes Cooking timer You can use the timer on your cooker to set a time of up to 99 minutes. Touch the and symbols repeatedly and at the same time until the a indicator for the cooking timer flashes. Set the time using the and symbols. The time disappears after a few seconds. The shortest time set with the timer is displayed. 17 When the cooking time has elapsed Changing the time Note A signal sounds for one minute. Touch the and symbols repeatedly and at the same time until the a indicator for the cooking timer flashes. The cooking timer is no longer in operation after a power cut. Rapid pre-heating This function can be used when you want to heat something up to the maximum temperature quickly and then switch to a steady lower temperature automatically. How to program Example: you want to use the power level e as the lower steady temperature All the hotplates are fitted with this function. Touch both the + and ­ symbols at the same time. The light will flash on and off and show alternatively A and the power level (e. g. 4). After the corresponding amount of time has passed the hotplate will automatically switch to the level selected (e. g. 4). The rapid pre-heating function has now finished and has switched off. 18 Memory function You can use the memory function to store the heat settings and times for one meal which can be called up again at any time. It is sensible to use the memory function if you require several different heat settings in order to prepare a meal, and if there is a meal which you cook particularly often. The conditions must always be the same as when you stored the settings when preparing the dish, e. g. : the same pan, the same quantity and the same initial temperature of the dish. Storing the setting You can store one memory event for each hotplate. The hob must be switched on. Touch the symbol for at least 2 seconds. [. . . ] This could result in matt patches. 23 Procedure in the event of a malfunction Malfunctions often have simple explanations and may be easily rectified. Please read the following instructions before calling the after sales service. The hob does not work Check whether there is a power supply to the appliance. Check whether the circuit breaker or fuse on your electric appliance has tripped. [. . . ]