User manual SIEMENS ET7Y7502

[. . . ] . 3-31 Instruction manual ET 7Y. . 9000075377 S021185 1 ø 18 ø 27, 5/21/14, 5 ET 7Y. . ø 35/14, 5 ø 18/12 ø 20/14, 5 Ø = cm 2 Table of contents Important information . 5 5 5 6 8 8 9 10 11 11 11 12 13 14 16 16 17 17 18 19 19 20 21 22 23 24 3 Table of contents Switching off input confirmation . 25 25 25 25 26 27 28 29 29 30 30 4 Important information Read this instruction manual carefully. [. . . ] When the cooking time has elapsed, the hotplate switches off automatically. 1. Set the heat setting on the hotplate which is to be operated with the timer function. 2. Touch the < and > symbols at the same time. The 1 indicator for the required hotplate flashes. If you select a different hotplate, touch the < and > symbols repeatedly and at the same time until the 1 indicator for the required hotplate flashes. 3. For >: 30 minutes For <: 10 minutes The 1 indicator for the hotplate flashes again. 19 4. Touch the > or < symbol until the desired cooking time appears in the timer indicator. If you have set a cooking time for several hotplates, it is always the shortest cooking time that is displayed. The 1 hotplate indicators light up. When the cooking time has elapsed When the cooking time has ended, the hotplate switches off. Touch the < and > symbols repeatedly and at the same time until the required 1 indicator flashes. Touch the < and > symbols repeatedly and at the same time until the required 1 indicator flashes. If you would like to call up the remaining cooking time for a hotplate: Touch the < and > symbols repeatedly and at the same time until the 1 indicator for the relevant hotplate flashes. The timer function is no longer active after a power cut. Changing the cooking time Cancelling prematurely Notes Cooking timer You can use the timer on your cooker to set a time of up to 99 minutes. It runs independently of all the other settings. 20 Setting procedure 1. Touch the < and > symbols repeatedly and at the same time until the a indicator for the cooking timer flashes. Set the time using the > and < symbols. The time disappears after a few seconds. When the cooking time has elapsed A signal sounds when the cooking time has elapsed. Touch the < and > symbols repeatedly and at the same time until the a indicator for the cooking timer flashes. The cooking timer is no longer in operation after a power cut. Changing the time Note Memory function You can use the memory function to store the heat settings and times for one meal which can be called up again at any time. It is sensible to use the memory function if you require several different heat settings in order to prepare a meal, and if there is a meal which you cook particularly often. The conditions must always be the same as when you stored the settings when preparing the dish, e. g. : the same pan, the same quantity and the same initial temperature of the dish. 21 Storing the setting You can store one memory event for each hotplate. The maximum cooking time that can be recorded is 99 minutes. Method 1. The hob must be switched on. Touch the 9 symbol for at least 2 seconds. [. . . ] If you select a low heat setting, the heat will switch off more often than at higher heat settings. Depending on the angle of vision, the heat may appear to spread beyond the marked boundary of the hotplate. These are technical features and do not influence quality or function. Depending on the surface area of the plate, a small, uneven gap may form between the plate and the hob. [. . . ]