User manual SIEMENS GIGASET A260

[. . . ] 1 Gigaset A160/A260 Handset for A260 14 5 Handset for A160 Base station 1 Charge status of the 1 battery pack 2 2 Internal number of the handset 3 Display keys 4 Message key 5 Directory key 3 6 Control key 4 7 Talk key 5 6 8 End call and 7 On/Off key 9 Ringtone on/off (press 8 and hold in idle status) 10 Key lock on/off (press and hold) 11 Recall key - Confer (flash) 9 - Dialling pause 10 (press and hold) 11 12 Microphone 12 13 Alarm clock key 13 14 Handsfree key (only Gigaset A260) 2 11. 12. INT 11:56 MENU V Registration/Paging key (page 6/page 6) Display keys: Pressing the keys launches whichever function that appears above them in the display. Confirm menu function or save entry. INT MENU " U T ~ OK Siemens Gigaset contact numbers: For personal advice on our range of products call: Premium Hotline UK: 09069 5004 30 (£0. 75/min) You can talk to qualified technicians who will guide you expertly through product infomation and installlation. For repairs or guarantee/warranty claims, please contact: Service Centre UK: 08453 6708 12 (local call cost charge) Please have your proof of purchase ready when calling. 2 Safety precautions W Read the user guide and the safety precautions carefully before use. [. . . ] For speed dial, assign the current entry to a key. (as in the directory, page 5) Copy an entry to the directory (as in the directory, page 5) (as in the directory, page 5) Edit Entry Delete Entry Send Entry Delete List Send List Shortcut Calls list/ answering machine (network mailbox) list When a new message arrives in the calls/answering machine list, a signal sounds and the display blinks. If only one list contains new messages, this will be opened automatically. Please note: If calls are saved in the network mailbox, you will receive a message if the appropriate settings have been made (). Using speed dial keys Press and hold the required speed dial key. Sending the directory to another handset Preconditions: The sending and receiving handsets must both be registered to the same base station. The other handset and the base station can send and receive directory entries. Calls list Precondition: CLIP (page 4) The numbers of the last 20 missed calls are saved. Multiple calls from the same number are only saved once (the last call). The calls list is displayed as follows: CallsList 01+02 Number of new entries + number of old, read entries v ¢ u (Select entry) ¢ MENU ¢ Send Entry / Send List ¢ OK ¢ ~ (Enter the internal number of the receiving handset) ¢ OK Last number redial list This list contains the ten last dialled numbers. Dialling from the last number redial list c c Press the key briefly. The number is dialled. u Opening the calls list f ¢ CallsList 01+02 ¢ OK Select entry with u. The last incoming call is displayed in the calls list. u (Select entry) ¢ MENU Delete Entry Copy to Dir. Date/Time Status Using other functions Managing entries in the last number redial list c Press the key briefly. Press the display key. The following functions can be selected with u: Delete current entry. Answ. : call taken. u MENU 6 Show Name If you have requested CNIP, you can show the name and town that are registered for your phone number with your network provider. All old and new entries will be deleted. Using several handsets Making internal calls Internal calls are no-cost calls to other handsets that are registered to the same base. All handsets will ring at the same time ("paging"), even if the ringtones are switched off. End paging: briefly press the register/paging key on the base station (page 1) or the talk key c on a handset. A 3 1 0 0 8 - M1 8 0 1 - L 1 0 1 - 1 - 7 6 1 9 Issued by Siemens Home and Office Communication Devices GmbH & Co. KG Schlavenhorst 66 D-46395 Bocholt © Siemens Home and Office Communication Devices GmbH & Co. www. siemens. com/gigaset 7 Internal listening in You want to listen in to an existing external call. If the first internal participant presses the end call key a, the handset that has 'listened in' remains connected to the external caller. Base station settings The base station settings are carried out using a registered handset. Restoring the base station to the factory settings When the settings are restored all handsets are deregistered. MENU Settings OK Base OK Base Reset OK Handset settings Change display language ¢ ¢ ¢ ¢ ¢ ¢ OK MENU Settings OK Handset OK Language OK Select the language ¢ ¢¢ ¢ If you accidentally choose a language you do not understand: 3 2 1 (Press the keys one after the other) MENU The current language is indicated by . Select the correct language with u and press OK. ¢ If you have forgotten your system PIN you can reset the base station to the original code 0000: Disconnect the power cord from the base station. Hold down the registration/paging key (page 1) on the base station while reconnecting the power cable to the base station at the same time. The base station has now been reset and the system PIN 0000 set. ¢ ¢ ¢ ¢ Operating the base station on the PABX The following settings are only necessary when your PABX requires them, see the PABX user guide. Setting the alarm clock Activating/deactivating the alarm clock MENU Or: Press the alarm clock key g. When the alarm clock rings, press any key to switch it off for 24 hours. ¢ OK ( = on) ¢ Alarm Clock ¢ OK ¢ Activation Changing the dialling mode MENU 33911 The number for the set dialling mode flashes: 0 = Touch tone dialling (DTMF); 1 = Dial pulsing (DP) Enter number ¢ ¢ ¢OK. ¢ Setting the wake up time MENU Enter the wake up time in hours and minutes, then press OK. ¢ Alarm Clock ¢ OK ¢ Wake-up time ¢ OK Resetting the handset rent flashing time flashes: 0 = 80 ms; 1 = 100 ms; 2 = 120 ms; 3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms; 7 = 800 ms Enter number OK. Setting the flashing time MENU ¢ I I O 1 2 ¢ The number for the cur- ¢ ¢ Changing pause after line seizure You can set the length of the pause inserted between pressing the talk key c and sending the phone number. You can reset any individual settings and changes that you have made. Entries in the directory, the calls list and the handset's registration on the base station will be retained. [. . . ] The purchase receipt, together with the date of purchase, shall be required as evidence for invoking the Guarantee. Claims under the Guarantee must be submitted within two months of the Guarantee default becoming evident. Ownership of devices or components replaced by and returned to Siemens shall vest in Siemens. This Guarantee shall apply to new devices purchased in the European Union. [. . . ]