User manual SIEMENS HB15N550B
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SIEMENS HB15N550B. We hope that this SIEMENS HB15N550B user guide will be useful to you.
 |
SIEMENS HB15N550B : Download the complete user guide (497 Ko) |
Manual abstract: user guide SIEMENS HB15N550B
Detailed instructions for use are in the User's Guide.
[. . . ] Installation instructions
2
Assembly Instructions
For the installer and kitchen expert!Important installation notes
Properly dispose of packaging materials. [. . . ] The properly installed appliance must be covered on all sides in such a fashion that not even components with rough insulation are exposed to the touch. The cover must be removable with tools only.
The connection diagramm is located on the rear panel of the appliance.
220-240V ~
L N
3
Installation without cupboard
600
min. 1.
3.
Installation of the build-in oven
0
To burn-in the insulation, heat up the oven prior to installing the unit. Push the built-in oven into the housing unit and align the unit until it is in a level position. Open the oven door and, using one screw on each side, fasten the built-in oven to the side strips of the housing unit (see illustration). The two screws (supplied with the built-in oven) must be started slightly outward.
4.
Verify that the built-in oven is positioned securely and in a level position, and that the required installation dimensions have been maintained. The properly installed appliance must be covered on all sides in such a fashion that not even components with rough insulation are exposed to the touch. The cover must be removable with tools only.
5.
Kitchen furniture Oven housing units from virtually all lines of kitchen furniture are suitable for installing the built-in oven. However, the veneers or plastic laminates on the housing unit must be applied with heat-resistant glue (90 °C). If plastic laminate or glue are not sufficiently heat-resistant, warping, bubbling or detachment of the finish may result.
5
Installation with cupboard
560570
min. 3
1.
6
2.
Installation of the build-in oven
To burn-in the insulation, heat up the oven prior to installing the unit. Push the built-in oven into the housing unit and align the unit until it is in a level position. [. . . ] However, the veneers or plastic laminates on the housing unit must be applied with heat-resistant glue (90 °C). If plastic laminate or glue are not sufficiently heat-resistant, warping, bubbling or detachment of the finish may result.
7
9000 034 865
Printed in Germany 0405 Es. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SIEMENS HB15N550B
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SIEMENS HB15N550B will begin.