User manual SITECOM MD-254

[. . . ] MD-253/254 Home Storage Center Manual Table of contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Product layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Preparing the home storage center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Easy installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select `I accept the terms in the license agreement' and click Next. 3. Click Next to install AutoSave to the default location on your computer. 5. Click finish to end the installation and launch AutoSave Note : AutoSave will backup the files from your computer to your personal share. If you have not configured a personal share, AutoSave will backup to the public share. In this situation AutoSave will warn you and gives you the opportunity to stop the backup process. If you want to change the backup location, files or schedule, please see the AutoSave manual on CD-Rom for detailed instructions. Using the Home Storage Center After this installation is finished you'll have at least a new `Public on SitecomNAS' network drive in you're my Computer environment. If you have made a personal share you'll also find it in the same location. You can drag and drop files to and from these networks drive just like you would do on your normal C drive. Configuring the Home Storage Center Mac When inserting the CD a window appears. Click the Install Home Storage Center packet installer. Click Continue in the introduction page. The installer is now detecting the `Home Storage Center'. Wait till the progress bar is completely filled. After the detection is finished the installer will show the detected hard drives. Click Continue to continue the installation. If any of the inserted Hard drives is not detected: Unplug the power receptacle and check the connection of the hard drive. Click OK to format the disk(s) in the NAS. Note: When 2 hard drives are inserted the installer will automatically format the drives using RAID 1 for data reliability. (See addendum for more information on storage schemes. ) To change the `Home storage center' to a different storage scheme, see chapter web configuration->Setup->Disk Settings. The disk(s) are being formatted, this could take some time. Now we will create a public share. (See Web configuration->User management -> shared folder management. ) The installer will create an alias to the share in your user folder. Click Browse if you want to select an alternative location for the alias. Click Continue to continue. In the next step you can create an optional private share. Note: A private share is a secured share, only accessible with a username and password. To change the properties of this folder See Web configuration->User management -> shared folder management. Fill in a folder name, username and password for the share. If the box is checked, the username and password will be stored in your keychain. Click Browse if you want to select an alternative location for the alias. Click Continue. The package installer allows you to expand the functionalities of your Home Storage Center. If there is not enough internal memory for all events, logs of older events are deleted, but logs of the latest events are retained. Setup Here you can configure the Home Storage Center. Tip: These settings are also included in the Sitecom installer which offers a much easier installation flow. System settings Device name: Enter a desired name for your Home Storage Center. Workgroup: Choose the name of the Workgroup the Home Storage Center has to be added to. [. . . ] Allow anonymous login: Choose here to allow anonymous users to access the storage center by FTP. The username is `anonymous' and an email address must be entered in the password field. Anonymous Access: Here the permissions can be set for the anonymous user to either 'Read only' or 'Allow Read and Write'. Toolbox Reboot When the storage center shows abnormal behavior it may be required to restart the device. Note: This will erase all current settings. Firmware update This tool allows you to upgrade the firmware. Intranet Upgrade To upgrade the firmware, you need to download the firmware file to your local hard disk, and enter that file name and path in the appropriate field on this page. [. . . ]